1091. Preoperative intensity-modulated chemoradiotherapy with simultaneous integrated boost in rectal cancer : five-year follow-up results of a phase II studyJasna But-Hadžić, Anja Meden Boltežar, Tina Škerl, Vesna Zadnik, Vaneja Velenik, 2021, izvirni znanstveni članek Povzetek: We conducted a phase II study to investigate the feasibility and safety of preoperative radiochemo-therapy experimental fractionation, using intensity-modulated radiation therapy with simultaneous integrated boost (IMRT SIB) to shorten the overall treatment time without dose escalation in intermediate/locally advanced rectal cancer with the aim to improving treatment outcome.Patients and methods. A total of 51 patients with operable stage II–III rectal carcinoma were included between January 2014 and January 2015. Fifty patients completed preoperative IMRT treatment with an elective dose of 41.8 Gy and simultaneously delivered 46.2 Gy to T2/T3 and 48.4 Gy to T4 tumour in 22 fractions, with concomitant capecit-abine (825 mg/m2/12 h, including at weekends). Median follow-up was 70 months (range 11–80 m).Results. Forty-seven patients completed treatment per protocol. Acute toxicity occurred in 2 (4%) patients. R0 resec-tion was achieved in all but 1 and pathologic complete response (pCR) in 12 (25.5%) patients who had 5-year overall survival (OS), disease-free survival (DFS) and local control (LC) of 91.7%, 100% and 100%, respectively. The intention-to-treat analysis showed that the type of surgery significantly moderated OS and DFS, while total downstaging and pN were predictive for DFS only. For treatment per protocol 5-year OS, DFS and LC were 80.9% (95% confidence interval [CI] 69.7–92.1), 77.1% (95% CI 65.1–89.1) and 95.2% (95% CI 88.7–100), respectively. The proportion of patients with severe late (CTCAE G ≥ 3) gastrointestinal, urinary and sexual toxicity was 15%, 2% and 8% respectively, with one reported secondary carcinoma.
Ključne besede: rectal cancer, IMRT, simultaneous integrated boost, preoperative radiochemotherapy, acute toxicity
Objavljeno v DiRROS: 23.07.2024; Ogledov: 270; Prenosov: 103
 Celotno besedilo (511,47 KB) |
1092. Bridging biotremology and chemical ecology : a new terminologyValerio Mazzoni, Gianfranco Anfora, Reginald Bifield Cocroft, Fatouros Nina E., Meta Virant-Doberlet, 2024, pregledni znanstveni članek Povzetek: Living organisms use both chemical and mechanical stimuli to survive in their environment. Substrate-borne vibrations play a significant role in mediating behaviors in animals and inducing physiological responses in plants, leading to the emergence of the discipline of biotremology. Biotremology is experiencing rapid growth both in fundamental research and in applications like pest control, drawing attention from diverse audiences. As parallels with concepts and approaches in chemical ecology emerge, there is a pressing need for a shared standardized vocabulary in the area of overlap for mutual understanding. In this article, we propose an updated set of terms in biotremology rooted in chemical ecology, using the suffix ‘-done’ derived from the classic Greek word ‘δονέω’ (pronounced ‘doneo’), meaning ‘to shake’.
Ključne besede: vibrational communication, chemical ecology, biotremology, semiophysicals, pherodones, allelodones, zoology
Objavljeno v DiRROS: 23.07.2024; Ogledov: 286; Prenosov: 172
Celotno besedilo (679,97 KB)
Gradivo ima več datotek! Več... |
1093. Scaphoideus titanus forecasting and management : quo vadis?Elena Gonella, Giovanni Benelli, Nathalie Arricau-Bouvery, Domenico Bosco, Meta Virant-Doberlet, 2024, pregledni znanstveni članek Povzetek: Scaphoideus titanus Ball (Hemiptera: Cicadellidae) is a major pest for European viticulture due to its high efficiency in the transmission of one of the most destructive pathogens for grapevine, namely flavescence dorée phytoplasmas. Although it plays a major role in spreading this disease, S. titanus is part of a complex epidemiological cycle involving several alternative vectors with variable relevance for phytoplasma spread. Here we provide an updated review on S. titanus monitoring and modelling, as well as the available tools for management of this pest and for limiting phytoplasma transmission and, thus, also spread. Insecticide-based control is examined; additional emphasis is placed on innovative and low-impact control approaches, such as vibrational mating disruption, biocontrol, and methods to reduce vector competence. We also discuss the main emerging challenges to the implementation of effective and sustainable control programs against S. titanus.
Ključne besede: epidemiology, pest monitoring, modelling, Integrated Pest Management, vibrational mating disruption, biological control, plant resistance elicitors, RNA-interference, symbiotic control, entomology, insects, plant protection
Objavljeno v DiRROS: 23.07.2024; Ogledov: 276; Prenosov: 195
Celotno besedilo (814,31 KB)
Gradivo ima več datotek! Več... |
1094. Scaphoideus titanus up-to-the-minute : biology, ecology, and role as a vectorElena Gonella, Giovanni Benelli, Nathalie Arricau-Bouvery, Domenico Bosco, Meta Virant-Doberlet, 2024, pregledni znanstveni članek Povzetek: Native to the Nearctic region, Scaphoideus titanus Ball (Hemiptera: Cicadellidae) has become a major threat for grapevine production after being unintentionally introduced into Europe, where it became the main vector of flavescence dorée phytoplasma, being mainly associated with the genus Vitis. Scaphoideus titanus is a highly efficient vector of the most important phytoplasma affecting grapevine. For this reason, compulsory insecticide treatments have been introduced against this pest in many European countries. Moreover, the continuous expansion of its geographical distribution makes this leafhopper a serious threat for several non-European Countries. In this article, we review the current knowledge about its taxonomy, morphology, biology, ecology, and its role as a vector. Finally, we point out the main challenges for research aimed at reducing S. titanus and flavescence dorée expansion across Europe and avoiding spread of the disease outside the Old World.
Ključne besede: vector distribution, life cycle, morphology, taxonomy, feeding behaviour, entomology, insects
Objavljeno v DiRROS: 23.07.2024; Ogledov: 332; Prenosov: 165
Celotno besedilo (982,26 KB)
Gradivo ima več datotek! Več... |
1095. Harmonizing microstructures and enhancing mechanical resilience : novel powder metallurgy approach for Zn–Mg alloysAnna Boukalová, Jiří Kubásek, David Nečas, Peter Minárik, Črtomir Donik, Drahomír Dvorský, Dalibor Vojtěch, Alena Michalcová, Matjaž Godec, Irena Paulin, 2024, izvirni znanstveni članek Povzetek: Zinc alloys are recognised for their excellent biocompatibility and favourable corrosion rates, making them suitable for bioabsorbable implants. However, their mechanical properties necessitate improvement to fulfil the rigorous requirements of biomedical applications. This research focuses on engineering pseudo-harmonic structures within zinc alloys through a comprehensive method combining mechanical alloying, spark plasma sintering, and hot extrusion techniques. This fabrication process results in a composite material characterised by a soft core surrounded by a continuous, three-dimensional, ultrafine-grained hard shell. The experiment involved blending pure zinc with Zn–1Mg alloy powder, leading to the formation of both ductile zinc and fine-grained Zn–1Mg regions. While the Mg2Zn11 intermetallic phase was found to enhance the alloy's mechanical strength, the presence of oxide shells adversely affected the material's properties. The elimination of these shells via hot extrusion markedly improved the alloy's tensile strength, reaching an average value of tensile strength of 333 ± 7 MPa. This study provides significant insights into the material engineering of zinc-based alloys for biodegradable implant applications, demonstrating a viable approach to optimising their mechanical performance.
Ključne besede: zinc, magnesium, biodegradable, powder metallurgy, harmonic structure
Objavljeno v DiRROS: 23.07.2024; Ogledov: 251; Prenosov: 214
Celotno besedilo (14,29 MB)
Gradivo ima več datotek! Več... |
1096. Microstructural, corrosion and mechanical properties of a WE43 alloy : conventional extrusion versus SPDAnna Dobkowska, Aleksandra Zielińska, Irena Paulin, Črtomir Donik, Milena Koralnik, Bogusława Adamczyk-Cieślak, Monika Wieczorek-Czarnocka, Dariusz Kuc, Jiří Kubásek, Tomasz Mikuszewski, Matjaž Godec, Jarosław Mizera, 2024, izvirni znanstveni članek Povzetek: A hexagonal close-packed-structure WE43 alloy was extruded without any preheating of the initial billet using extrusion with an oscillating die to improve the corrosion and mechanical properties. The WE43 alloy was extruded at high ratios of R 1 5:1, R 2 7:1 and R 3 10:1. Electron back-scatter diffraction and transmission electron microscopy were used to determine the microstructural properties of the alloys. The influence of the extrusion method and the extrusion ratios on the corrosion and mechanical properties were investigated. Electrochemical tests were performed, and the corrosion damage was inspected. Tensile tests were made using micro specimens. When compared to conventional extrusion, the microstructural changes obtained with the KoBo method at R 5:1 increased the corrosion resistance, which was not only due to the grain refinement, but also due to the intensity of the texture. A decline in the corrosion resistance of the alloys deformed at higher extrusion ratios was observed. This was a result of the massive plastic strain imposed by the KoBo die. The room-temperature mechanical properties of the KoBo-extruded alloys were improved. However, at higher temperatures the mechanical properties decreased due to the solutioning of tiny triple precipitates.
Ključne besede: WE43, several plastic deformation, microstructure, corrosion, mechanical properties
Objavljeno v DiRROS: 23.07.2024; Ogledov: 269; Prenosov: 104
 Povezava na datoteko |
1097. Exploring the microstructure, mechanical properties, and corrosion resistance of innovative bioabsorbable Zn-Mg-(Si) alloys fabricated via powder metallurgy techniquesDavid Nečas, Vojtěch Hybášek, Jan Pinc, Andrea Školáková, Ilona Voňavková, Klára Hosová, Martin Zlámal, Anna Boukalová, Jan Pokorný, Drahomír Dvorský, Črtomir Donik, Dalibor Vojtěch, Jiří Kubásek, 2024, izvirni znanstveni članek Povzetek: Zinc alloys belong to the widely studied materials for applications like medical devices, however, they often
encounter an inappropriate combination of mechanical/corrosion/biological properties. In this respect, we
produced the Zn–1Mg and Zn–1Mg–1Si containing biologically friendly elements with potential strengthening
effects on zinc matrix by powder metallurgy methods including mechanical alloying, spark plasma sintering, and
extrusion further enabling the formation of materials with unique extremely fine-grained microstructures. The
systematic study of these materials showed the possibility of reaching homogeneous nano-grain microstructure
and high strength values exceeding 450 MPa in tension. Selected chemical composition and processing methods
led also to slightly decreased wear and corrosion rates and rather uniform corrosion.
Ključne besede: zinc, mechanical alloying, biodegradable metals, composite, spark plasma sintering, extrusion, powder metallurgy
Objavljeno v DiRROS: 23.07.2024; Ogledov: 238; Prenosov: 210
Celotno besedilo (21,50 MB)
Gradivo ima več datotek! Več... |
1098. Diagnostic performance of p16/Ki-67 dual immunostaining at different number of positive cells in cervical smears in women referred for colposcopyUršula Salobir Gajšek, Andraž Dovnik, Iztok Takač, Urška Ivanuš, Tine Jerman, Simona Šramek Zatler, Alenka Repše-Fokter, 2021, izvirni znanstveni članek Povzetek: . The aim of the study was to evaluate the diagnostic accuracy of p16/Ki-67 dual immunostaining (p16/ Ki-67 DS) in cervical cytology and the number of positive p16/Ki-67 cells to diagnose high grade cervical intraepithelial neoplasia (CIN2+) in colposcopy population. Subjects and methods. We performed an analysis on a subset cohort of 174 women enrolled within a large-scale randomised controlled human papillomavirus (HPV) self-sampling project organised as part of the population-based Cervical Cancer Screening Programme ZORA in Slovenia. This subset cohort of patients was invited to the colposcopy clinic, underwent p16/Ki-67 DS cervical cytology and had the number of p16/Ki-67 positive cells determined. Results. Among analysed women, 42/174 (24.1%) had histologically confirmed CIN2+. The risk for CIN2+ was increasing with the number of positive cells (p < 0.001). The sensitivity of p16/Ki-67 DS for detection of CIN2+ was 88.1%, specificity was 65.2%, positive predictive value was 44.6% and negative predictive value was 94.5%. Conclusions. Dual p16/Ki-67 immunostaining for the detection of CIN2+ has shown high sensitivity and high negative predictive value in our study, which is comparable to available published data. The number of p16/Ki-67 positive cells was significantly associated with the probability of CIN2+ detection. We observed a statistically significant and clinically relevant increase in specificity if the cut-off for a positive test was shifted from one cell to three cells.
Ključne besede: cervical cytology, high-grade dysplasia, p16/Ki-67 immunostaining
Objavljeno v DiRROS: 22.07.2024; Ogledov: 298; Prenosov: 102
Celotno besedilo (441,03 KB) |
1099. MitomiRs: their roles in mitochondria and importance in cancer cell metabolismAndrej Renčelj, Nada Gvozdenović, Maja Čemažar, 2021, pregledni znanstveni članek Povzetek: Background. MicroRNAs (miRNAs) are short non-coding RNAs that play important roles in almost all biological path- ways. They regulate post-transcriptional gene expression by binding to the 3%untranslated region (3%UTR) of messenger RNAs (mRNAs). MitomiRs are miRNAs of nuclear or mitochondrial origin that are localized in mitochondria and have a crucial role in regulation of mitochondrial function and metabolism. In eukaryotes, mitochondria are the major sites of oxidative metabolism of sugars, lipids, amino acids, and other bio-macromolecules. They are also the main sites of adenosine triphosphate (ATP) production. Conclusions. In the review, we discuss the role of mitomiRs in mitochondria and introduce currently well studied mito- miRs, their target genes and functions. We also discuss their role in cancer initiation and progression through the regu- lation of mRNA expression in mitochondria. MitomiRs directly target key molecules such as transporters or enzymes in cell metabolism and regulate several oncogenic signaling pathways. They also play an important role in the Warburg effect, which is vital for cancer cells to maintain their proliferative potential. In addition, we discuss how they indirectly upregulate hexokinase 2 (HK2), an enzyme involved in glucose phosphorylation, and thus may affect energy metabo- lism in breast cancer cells. In tumor tissues such as breast cancer and head and neck tumors, the expression of one of the mitomiRs (miR-210) correlates with hypoxia gene signatures, suggesting a direct link between mitomiR expression and hypoxia in cancer. The miR-17/92 cluster has been shown to act as a key factor in metabolic reprogramming of tumors by regulating glycolytic and mitochondrial metabolism. This cluster is deregulated in B-cell lymphomas, B-cell chronic lymphocytic leukemia, acute myeloid leukemia, and T-cell lymphomas, and is particularly overexpressed in several other cancers. Based on the current knowledge, we can conclude that there is a large number of miRNAs present in mitochondria, termed mitomiR, and that they are important regulators of mitochondrial function. Therefore, mitomiRs are important players in the metabolism of cancer cells, which need to be further investigated in order to develop a potential new therapies for cancer.
Ključne besede: microRNAs, mitomiR, mitochondria, cancer cell metabolism
Objavljeno v DiRROS: 22.07.2024; Ogledov: 305; Prenosov: 106
Celotno besedilo (736,13 KB) |
1100. |
