1981. |
1982. Development of an electrical resistance sensor from high strength steel for automotive applicationsTadeja Kosec, Viljem Kuhar, Andrej Kranjc, Vili Malnarič, Branko Belingar, Andraž Legat, 2019, izvirni znanstveni članek Povzetek: This work focuses on a demonstration of the monitoring of corrosion processes taking place in high strength steel in automotive applications. This is performed by means of a corrosion sensor, which operates as an electrical resistance sensor. It was developed from the same type of material that is used for the high-strength steel parts produced in the automotive industry. Using the sensor, real time corrosion processes can be measured. It is attached to a location inside the vehicle’s engine and is equipped with a data logger, which enables wireless transfer of the measured data. In this study the development, operation, and evaluation of the monitoring process are presented. Corrosion estimation is verified by means of electrochemical methods. A metallographic investigation was included in order to verify the similarity between the microstructural properties of the sensor and those of the as-received high-strength steel sheet. Ključne besede: high strenghth steel, automotive, electrical resistance sensor, corrosion Objavljeno v DiRROS: 24.10.2023; Ogledov: 636; Prenosov: 210 Celotno besedilo (2,33 MB) Gradivo ima več datotek! Več... |
1983. Production of lightweight alkali activated mortars using mineral woolsAhmad Alzaza, Mohammad Mastali, Paivo Kinnunen, Lidija Korat, Zahra Abdollahnejad, Vilma Ducman, Mirja Illikainen, 2019, izvirni znanstveni članek Povzetek: This experimental study aimed to develop a fiber-reinforced lightweight mineral wool-based alkali activated mortar. The lightweight mineral wool-based alkali activated mortars were produced using premade foam and reinforced by polypropylene (PP) fibers. They were assessed in terms of fresh and hardened-state properties. Fresh-state properties were investigated by mini-slump tests. Hardened-state characteristics were assessed by ultrasonic pulse velocity, dry density, compressive and flexural strengths, drying shrinkage, efflorescence, water absorption, and permeable porosity. For the first time, the resistance of the synthesized lightweight mineral wool-based alkali activated mortars against harsh conditions (carbonation, freeze and thaw, and high temperature) were evaluated. The porous structures of the developed lightweight alkali activated mortars were also analyzed using an X-ray micro-computed tomography (CT) technique. Lightweight mix compositions with densities in a range of 770%1510 kg/m3, compressive strengths of 1%9 MPa, and flexural strengths of 2.6%8 MPa were developed. Increases in both density and strength after carbonation were also recorded, while a decrease of strength was noticed after exposure to freeze/thaw and high temperatures of up to 500 %C. Ključne besede: alkali activation, mineral wool, mortars Objavljeno v DiRROS: 24.10.2023; Ogledov: 444; Prenosov: 176 Celotno besedilo (10,47 MB) Gradivo ima več datotek! Več... |
1984. Legislative and judicial responses to the “refugee crisis” in Slovenia and Austria : a comparative perspectiveNeža Kogovšek Šalamon, 2023, izvirni znanstveni članek Povzetek: The article compares key normative and judicial responses to the 2015–2016 “refugee crisis” in Slovenia and Austria. It does so by comparing the asylum statistics, the main changes to the legislation reflecting populist reactions to the “refugee crisis,” and judicial responses to these changes and reactions. The qualitative legal analysis is based on examples of the most important changes and responses. The article considers the populistic context of these changes, as discussed by some political scientists, who demonstrate that with the crisis, a new wave of populism—“the populist Othering of migrants”—emerged. Ključne besede: refugee crisis, constitutional court, Slovenia, Austria, populism Objavljeno v DiRROS: 24.10.2023; Ogledov: 486; Prenosov: 182 Celotno besedilo (135,47 KB) Gradivo ima več datotek! Več... |
1985. Cost-benefit analysis in fire safety engineering : state-of-the-art and reference methodologyRuben Van Coile, Andrea Lucherini, Ranjit Kumar Chaudhary, Shuna Ni, David Unobe, Thomas Gernay, 2023, izvirni znanstveni članek Povzetek: Cost-effectiveness is a key consideration within fire safety engineering. Currently, different approaches are being applied in literature. These approaches differ in how cost-effectiveness is evaluated, which costs are considered, and how the preferred design solution is defined. Recognizing this issue, the Fire Protection Research Foundation enrolled an international team of researchers, supported by a broad stakeholder panel, to develop a reference methodology. In this paper, this reference methodology for cost-benefit analysis in fire safety engineering is presented following an extensive literature review. The methodology clarifies the minimum requirements for assessing cost-effectiveness, and highlights that only a present net value evaluation can be used to compare design alternatives. Commonly used cost-benefit ratios should only be used when deciding on the effectiveness of a single package of fire safety measures. An illustrative case study demonstrates the application of the meth- odology and shows how designs based on cost-benefit ratios can be sub-optimal when evaluating multiple possible fire safety measures. Ključne besede: cost-benefit analysis, fire safety, investment, maintenance, loss, statistics, reliability Objavljeno v DiRROS: 23.10.2023; Ogledov: 488; Prenosov: 126 Povezava na datoteko Gradivo ima več datotek! Več... |
1986. |
1987. |
1988. |
1989. |
1990. |