31. The effect of bedrock and species mixture on wood density and radial wood increment in pubescent oak and black pineLuka Krajnc, Polona Hafner, Jožica Gričar, 2020, original scientific article Abstract: Wood density and radial wood increment were examined in trees of pubescent oak (Quercus pubescens Willd.) and black pine (Pinus nigra Arnold., subsp. nigra) in relation to stand mixture and underlying bedrock. Trees of both species from pure and mixed stands were sampled across two types of bedrock, limestone and flysch. Trees from each species were similar in age. Wood density was estimated in standing trees using resistance drilling and increment cores were taken from a smaller subsample of trees of both species. Tree-ring, earlywood and latewood widths were measured and compared to radial profiles of wood density. The influence of stand mixture, diameter at breast height and bedrock on wood density was examined using a Bayesian general linear model. Wood density was significantly higher in pubescent oak than in black pine. Stand mixture was found to affect wood density positively, although the magnitude of the effect was relatively small when compared to other influencing factors also included in the current study. The effect of diameter on wood density was positive on both bedrocks in pubescent oak and negative or neutral in black pine. The size of the effect varied by bedrock and species. On flysch bedrock, the influence of diameter on wood density was stronger than it was on limestone. These indirect bedrock effects on wood density are probably a result of different soil fertility rather than the bedrock itself. There was a notable difference in radial wood increment in both species across the two bedrocks, whereas the differences in densities were smaller. Higher wood densities found on flysch in the subsample of pubescent oaks are likely an effect of higher proportions of latewood, while the opposite trend was observed in black pine. Higher wood density was found on limestone in black pine despite higher latewood percentages on flysch. In the context of forest management, the species composition of the naturally occurring mixtures in the sub-Mediterranean region should be adjusted slightly to favor pubescent oak, since it is a climax species and will bind more carbon for longer than black pine due to higher wood densities. Future forest management should also promote the overall development of pubescent oak trees in sub-Mediterranean stands. The results are especially important in the European context, because the share of sub-Mediterranean stands is expected to rise with global warming.
Keywords: Karst, wood structure, resistograph, resistance drilling, Quercus pubescens, Pinus nigra, limestone, flysch
Published in DiRROS: 14.01.2021; Views: 1368; Downloads: 579
 Full text (1,42 MB)
This document has many files! More... |
32. The effect of Eutypella parasitica on the wood decay of three maple speciesAna Brglez, Barbara Piškur, Miha Humar, Jožica Gričar, Nikica Ogris, 2020, original scientific article Abstract: Eutypella parasitica R.W. Davidson & R.C. Lorenz is the causative agent of Eutypella canker of maple, a destructive disease of maples in Europe and North America. The fungus E. parasitica is known to cause wood stain and decay. However, it is not known how effectively it decomposes the wood of the most widespread maple species in Europe. Wood samples of Acer pseudoplatanus L., A. platanoides L., and A. campestre L. were exposed to four isolates of E. parasitica and nine other fungal species for comparison, according to the modified EN 113 standard. After 15 weeks of incubation, mass loss and microscopical analysis of samples showed evidence of colonization and different wood decay potentials among fungal species. A highly significant positive correlation was found between mass loss and moisture content for all fungal species. Similarly, the measured cell wall thickness correlated well with the calculated mass loss of the samples. On average, the fungal species caused the lowest mass loss in A. pseudoplatanus (10.0%) and the highest in A. campestre (12.6%) samples. Among the samples exposed to E. parasitica isolates, the highest mass loss was recorded in A. pseudoplatanus (6.6%). Statistical analysis showed significant differences in mass loss and moisture content between different E. parasitica isolates. Based on the results of staining, we discuss the type of decay caused by E. parasitica. Although E. parasitica isolates caused smaller mass loss of samples compared to other more effective decay species, we should not disregard its capability of degrading maple wood. Because E. parasitica usually infects the lower portion of the trunk, which is the largest and most valuable part of the tree, any damage can cause significant economic and resource loss.
Keywords: wood decay, mass loss, moisture content, mini-block test, decay test, Acer spp., Eutypella parasitica, fungi, light microscopy, scanning electron microscopy
Published in DiRROS: 13.07.2020; Views: 2071; Downloads: 1443
Full text (8,28 MB)
This document has many files! More... |
33. Timeline of autumn phenology in temperate deciduous treesInge Dox, Jožica Gričar, Lorène Julia Marchand, Sebastien Leys, Paolo Zuccarini, Charly Geron, Peter Prislan, Bertold Mariën, Patrick Fonti, Holger Lange, Josep Peñuelas, Jan Van den Bulcke, Matteo Campioli, 2020, original scientific article Abstract: Cessation of xylem formation or wood growth (CWG) and onset of foliar senescence (OFS) are key autumn phenological events in temperate deciduous trees. Their timing is fundamental for development and survival of trees, ecosystem nutrient cycling, the seasonal exchange of matter and energy between the biosphere and atmosphere and affect the impact and feedback of forests to global change. A large-scale experimental effort and improved observational methods have allowed us to compare the timing of CWG and OFS for different deciduous tree species in Western Europe, in particularly silver birch, a pioneer species, and European beech, a late-succession species, at stands of different latitudes, of different levels of site fertility, and for two years with contrasting meteorological and drought conditions i.e., the low-moderately dry 2017 and the extremely dry 2018. Specifically, we tested whether foliar senescence started before, after or concurrently with CWG. OFS and CWG occurred generally between late September and early November, with larger differences across species and sites for OFS. Foliar senescence started concurrently with CWG in most cases, except for the drier 2018 and, for beech, at the coldest site, where OFS occurred significantly later than CWG. Behavior of beech in Spain, the southern edge of its European distribution, was unclear, with no CWG, but very low wood growth at the time of OFS. Our study suggests that OFS is generally triggered by the same drivers of CWG or when wood growth decreases in late summer, indicating an overarching mechanism of sink limitation as a possible regulator of the timing of foliar senescence.
Keywords: autumn phenology, xylem formation, foliar senescence, cambium, chlorophyll, radial growth, wood, decidiuous trees, common aspen, common beech, pedunculate oak, silver birch
Published in DiRROS: 10.06.2020; Views: 2191; Downloads: 1389
Full text (2,04 MB)
This document has many files! More... |
34. Inter-individual variability in spring phenology of temperate deciduous trees depends on species, tree size and previous year autumn phenologyLorène Julia Marchand, Inge Dox, Jožica Gričar, Peter Prislan, Sebastien Leys, Jan Van den Bulcke, Patrick Fonti, Holger Lange, Erik Matthysen, Josep Peñuelas, Paolo Zuccarini, Matteo Campioli, 2020, original scientific article Abstract: We explored the inter-individual variability in bud-burst and its potential drivers, in homogeneous mature stands of temperate deciduous trees. Phenological observations of leaves and wood formation were performed weekly from summer 2017 to summer 2018 for pedunculate oak, European beech and silver birch in Belgium. The variability of bud-burst was correlated to previous' year autumn phenology (i.e. the onset of leaf senescence and the cessation of wood formation) and tree size but with important differences among species. In fact, variability of bud-burst was primarily related to onset of leaf senescence, cessation of wood formation and tree height for oak, beech and birch, respectively. The inter-individual variability of onset of leaf senescence was not related to the tree characteristics considered and was much larger than the inter-individual variability in bud-burst. Multispecies multivariate models could explain up to 66% of the bud-burst variability. These findings represent an important advance in our fundamental understanding and modelling of phenology and tree functioning of deciduous tree species.
Keywords: leaf unfolding, wood formation, coloration, Pedunculate oak, European beech, Silver birch
Published in DiRROS: 10.06.2020; Views: 2117; Downloads: 1287
 Link to full text
This document has many files! More... |
35. Growing stock of nectar- and honeydew-producing tree species determines the beekeepers' profitJanez Prešern, Jan Mihelič, Milan Kobal, 2019, original scientific article Keywords: beekeeping, forage, environment carrying capacity, non-wood forest products, nectar, honeydew flow
Published in DiRROS: 29.04.2020; Views: 2513; Downloads: 739
Full text (2,05 MB) |
36. Patterns of tree microhabitats across a gradient of managed to old-growth conditions : a case study from beech dominated forests of South-Eastern SloveniaKristina Sever, Thomas Andrew Nagel, 2019, original scientific article Abstract: An inventory of tree microhabitats was done in two unmanaged forests (Kobile and Ravna gora forest reserves) and one managed beech forest in SE Slovenia. The purpose of this study was to determine the influence of forest management, natural disturbances, and tree characteristics on microhabitat patterns. Forest structure and microhabitats were recorded in systematically placed plots (500 m2 in size) across each area. In total, we inventoried 849 trees on 54 plots and 1833 tree microhabitats. The results showed that forest management had no significant influence on the abundance of microhabitats per tree, but there were differences regarding microhabitat type between managed and unmanaged sites. There were substantially more microhabitats related to standing dead and live habitat trees in unmanaged forest (e.g. woodpecker cavities, insect galleries and bore holes, branch holes, dead branches and fruiting bodies of fungi), whereas in managed forests there were more tree microhabitats related to management (e.g. exposed heartwood, coarse bark, and epiphytic plants). The results also indicate that disturbance, tree diameter, vitality, and species influence the density, diversity, and occurrence of tree microhabitats.
Keywords: forest management, biodiversity, tree microhabitats, beech forests, old-growth, veteran tree, natural disturbance, dead wood
Published in DiRROS: 08.07.2019; Views: 7370; Downloads: 3187
Link to full text
This document has many files! More... |
37. |
38. Effect of temperature on the eradication of house longhorn beetle larvae in wood by microwave treatmentMartin Klinc, Franc Pohleven, 2017, original scientific article Abstract: In repressive protection of cultural/historical woodwork, microwaves have many advantages over conventional heating. The research%s objective was to examine conditions for eradication of house longhorn beetle larvae (Hylotrupes bajulus) in spruce wood (Picea abies) using microwaves. Larvae, inserted at different depths of spruce blocks containing 12% and 42% of moisture, were exposed to microwaves. Two apparatuses were used; a 750W commercial microwave chamber and a newly developed horn antenna microwave device with the power of 800W and a frequency of 2.45GHz, for targeted radiation. We discovered that the inner part of wood warmed up quicker than the surface heated to 65°C. For successful suppression larvae in the wood need to be heated to 54.5°C, for 10 seconds. The necessary exposure time increases with increasing thickness of wood. The surface of wood containing more moisture is heated quicker, but increased moisture slows down the penetration of microwaves into the wood specimen. Therefore, larvae in wood of lower moisture (12%) died faster, both those 20mm under surface (1.5min) and those at 130 mm of depth (10.5min).
Keywords: wooden objects, repressive wood protection, microwaves, heating, wood moisture content, house longhorn beetle, Hylotrupes bajulus
Published in DiRROS: 25.10.2017; Views: 5364; Downloads: 3075
Full text (1,52 MB)
This document has many files! More... |
39. Assessing maximum loads when skidding wood uphill with tractorsBoštjan Košir, Jurij Marenče, 2008, original scientific article Abstract: The results of measuring maximum loads on different slopes when skidding uphill with WOO DY 110 cable skidder and adapted 4WD agricultural tractor AGT 835 are described in the article. Both tractors are very different and were chosen for the purpose of finding the limits of uphill skidding. Besides the slope, the pre-designated loads of different sizes and log orientation (butt-end or top-end forward) have been main variables. The trial was conducted on two concave shaped test skid trails in the forest. On the lower altitudes, the skid trails had small inclination, which slowly increased to 42% on the track where WOODY 110 was tested, and 27% where AGT 835 was measured. First the loads were skidded uphill with butt-end and then with top-end forward. The purpose was to choose too heavy loads, as we wished to stop tractors due to overload, but on different slopes. The proper load formation (butt-end forward if possible) in uphill skidding is most important on steeper skid trails. The dependency between maximum load and slope is linear. The calculated theoretical maximum load on horizontal surface enables us to make similar assessment for any other tractor weighing between 2 and 7 tons. For this purpose, John Deere 6220 and LIMB 80 LUXS adapted agricultural tractors for forest use were chosen and compared. The ratio between the tractor load on different slopes and tractor weight was calculated for all four tractors included in our comparison. Apart from the weight, tractor's engine torque (power) has the decisive influence on the load size. Maximum loads on different slope categories were calculated according to different engine powers.
Keywords: tractor, skidding wood, maximum slope, maximum load
Published in DiRROS: 12.07.2017; Views: 4648; Downloads: 1919
Full text (1,19 MB) |
40. Internal and external moisture transport resistance during non-stationary adsorption of moisture into woodBojan Bučar, 2007, original scientific article Abstract: The assumption that non-stationary sorption processes associated with wood canbe evaluated by analysis of their transient system response to the disturbance developed is undoubtedly correct. In general it is, in fact, possible to obtain by time analysis of the transient phenomenon - involving the transition into an arbitrary new state of equilibrium - all data required for a credible evaluation of the observed system. Evaluation of moisture movement during drying or moistening requires determination of external moisture transfer resistance from or to wood surfaces, as well as internal resistance. Time-dependent changes in the moisture content of the spruce (Picea abies Karst.) samples of different thickness were monitored gravimetrically, during which the frequency of weighing was in accord with thespeed of moistening. It was assumed that quasi-isothermal sorption processes associated with wood could be evaluated as first order systems. The characteristic time constant ? determines, wholly and uniformly, the time dependence of the sorption process for the relevant sorption range of wood tissue. The connection between the time constant and the thickness of the sample measured in the direction of the material flux is potential, with the power depending solely on the relationship between the external mass transfer convection and internal diffusion resistance. To determine the said resistances or coefficients of mass transfer convection and diffusivity, the experiment must be carried out on samples of varying thickness. It is only in this way that the external mass transfer convection and internal diffusion resistance can be correctly distinguished.
Keywords: wood sorption, first order system, time constant, mass transfer, diffusivity
Published in DiRROS: 12.07.2017; Views: 4770; Downloads: 1981
Full text (428,03 KB) |
