41. The effect of the addition of construction & demolition waste on the properties of clay-based ceramicsBiljana Angjusheva, Vilma Ducman, Emilija Fidanchevski, 2022, original scientific article Abstract: Waste glass and reclaimed brick are types of construction and demolition waste (C&DW) that could potentially be used as secondary raw materials in the production of ceramics. Ceramics based on clay, waste demolished brick (5-15 wt.%) and waste glass (5-20 wt.%) were produced by pressing (P = 68 MPa) and subsequently sintered at 900, 950, 1000, and 1050 ° C for one hour. The physical and mechanical properties of the ceramics obtained were evaluated. The addition of demolished brick decreased the density and mechanical properties of the clay specimens and increased the water absorption. The incorporation of waste glass improved the sintering behavior and its mechanical properties. The addition of 20 wt.% waste glass and 10 wt.% waste demolished brick into the clay matrix improved the flexural strength by up to 20.6 % and decreased the water absorption by up to 22 %. The approach presented promotes an opportunity to recycle construction and demolition waste into alternative resource materials, and represents a positive contribution to the environment. Keywords: CDW, ceramics, properties Published in DiRROS: 25.04.2023; Views: 390; Downloads: 197 Full text (1,85 MB) This document has many files! More... |
42. Structural and elastic properties of AgNi[sub]10 alloy studied with ab-initio calculationsJide Liu, Xue Wang, Xiaoming Du, Ming Xie Xie, Jinguo Li, Shangqiang Zhao, Yizhou Zhou, Qiao Zhang, Jiheng Fang, 2022, original scientific article Keywords: AgNi[sub]10 alloy, ab initio calculations, elastic anisotropy, thermodynamic properties Published in DiRROS: 22.06.2022; Views: 616; Downloads: 150 Link to file |
43. |
44. Current trends on mechanical, corrosion resistance, and antibacterial properties of metallic materials : editorialMarjetka Conradi, Aleksandra Kocijan, 2022, preface, editorial, afterword Keywords: steel, corrosion resistance, mechanical properties, antibacterial properties Published in DiRROS: 22.06.2022; Views: 535; Downloads: 145 Link to file |
45. |
46. |
47. Effect of the N[sub]2/Ar flow ratio on the microstructure and mechanical properties of TiSiCN coatingsJin Wang, Mengting Wang, Yongqiang Wang, Dayan Ma, Hao Li, 2021, original scientific article Keywords: TiSiCN, multi-arc ion plating, magnetron sputtering, N[sub]2/Ar flow ratio, mechanical properties, tribological properties Published in DiRROS: 06.05.2022; Views: 467; Downloads: 124 Link to file |
48. Influence of deep cryogenic treatment on natural and artificial aging of Al-Mg-Si alloy EN AW 6026Matic Klug Jovičević, Rok Rezar, Patricia Jovičević Klug, Bojan Podgornik, 2022, original scientific article Keywords: aluminum alloy, microstructure, mechanical properties, precipitation, dispersoids, deep cryogenic treatment Published in DiRROS: 06.05.2022; Views: 553; Downloads: 217 Link to file |
49. The evolution of microstructure and mechanical properties of Zn-0.8Mg-0.2Sr alloy prepared by casting and extrusionJiří Kubásek, Jan Pinc, Klára Hosová, Markéta Straková, Orsolya Molnárová, Jan Duchoň, David Nečas, Miroslav Čavojský, Matjaž Godec, Irena Paulin, 2022, original scientific article Keywords: zinc, magnesium, biodegradable, microstructure, mechanical properties, texture Published in DiRROS: 06.05.2022; Views: 788; Downloads: 208 Link to file |
50. A triangular representation of the volumetric properties of asphalt mixturesMarjan Tušar, Mojca Ravnikar Turk, Lidija Ržek, 2022, original scientific article Keywords: triangular representation, asphalt mixture, volumetric properties, void content, bitumen content, voids in aggregate Published in DiRROS: 10.03.2022; Views: 648; Downloads: 415 Full text (2,75 MB) This document has many files! More... |