1. The challenge of integrating Life Cycle Assessment in the building design process - a systematic literature review of BIM-LCA workflowsTajda Potrč Obrecht, Martin Röck, Endrit Hoxha, Alexander Passer, 2019, published scientific conference contribution Abstract: To foster sustainable development in construction sectors, environmental impacts need to be reduced dramatically. The Life Cycle Assessment (LCA) technique is the most firmly established methodology used to quantify these environmental impacts and, therefore, has been applied with increasing frequency to assess the environmental performance of buildings. To effectively improve a building's environmental performance, an integration of LCA in the design process is required. This can be achieved by coupling LCA with digital design tools, e.g., Building Information Modelling (BIM). To identify the pro and cons of streamlining the integration of LCA and BIM, a comprehensive Systematic Literature Review (SLR) was performed. We identified more than 50 relevant BIM-LCA case studies and analysed the applied BIM-LCA workflows in detail. In most of the studies reviewed, the LCA has been applied in an early design stage. The authors primarily used LCA tools and manual or semi-automatic methods to exchange data between BIM models. In most cases, contemporary BIM-LCA workflows utilized conventional spreadsheets (e.g., Excel worksheets). However, the results of the analysis show that an automated link between LCA and BIM can be achieved if certain challenges are overcome. By automating exchange of information between BIM and LCA tools and improving the reliability of this process, the LCA application can be streamlined in design practice and, hence, the necessary improvements of the environmental performance of buildings can be supported. Keywords: building information modelling, life cycle assessment, systematic Literature Review Published in DiRROS: 18.03.2024; Views: 140; Downloads: 97
Full text (453,33 KB) This document has many files! More... |
2. BIM and LCA integration : a systematic literature reviewTajda Potrč Obrecht, Martin Röck, Endrit Hoxha, Alexander Passer, 2020, review article Abstract: To foster sustainable development, the environmental impacts of the construction sector need to be reduced substantially. Life cycle assessment (LCA) is the established methodology for the quantification of environmental impacts, and therefore has been increasingly applied to assess the environmental performance of buildings. By coupling LCAs with digital design tools, e.g., building information modeling (BIM), the identification of environmental hotspots and their mitigation is possible during the design process. The objective of the study is to identify the current integration approaches, and determine the pros and cons of the integration process from different viewpoints, namely, technical, informational, organizational and functional issues. Therefore, a comprehensive systematic literature review (SLR) was performed. We identified 60 relevant BIM-LCA case studies and analyzed the applied BIM-LCA workflows in detail. A total of 16 of the reviewed studies applied LCA during the early design stage. These studies used a manual or semiautomatic data exchange between the BIM models and LCA tools. In most cases, contemporary BIM-LCA workflows utilized conventional spreadsheets (e.g., Excel sheets in 16 cases). However, the analysis shows that an automated link between LCA and BIM can be achieved when overcoming the technical, organizational and informational issues discussed in the paper. This could enable the streamlining of LCA applications in design practice, and thus support the necessary improvements in the environmental performance of buildings. Keywords: building information modeling (BIM), life cycle assessment (LCA), systematic literaturereview (SLR), environmental product declarations (EPD), workflow, bill of quantities (BoQ) Published in DiRROS: 05.03.2024; Views: 231; Downloads: 76
Full text (2,15 MB) This document has many files! More... |
3. Real-time monitoring and analyses of sensory data integrated into the bim platformStanislav Lenart, Veljko Janjić, Uros Jovanovic, Rok Vezočnik, 2021, published scientific conference contribution Abstract: Bridges and tunnels, crucial elements of the railway infrastructure, are exposed to various types of deterioration processes. Their condition is a subject of monitoring, as it is important to collect as much as possible information in every life cycle phase to reliably predict their future performance. An enormous quantity of monitoring data is generated during the whole life cycle of these assets. EU funded Shift2Rail research project Assets4Rail which is focusing on measuring, monitoring, and data handling for railway assets, as data management is as important as their generation. This paper presents the major outcomes of the Assets4Rail project and its application to infrastructure projects. Keywords: monitoring, information management, BIM, information management, bridge, tunnel, Assets4Rail Published in DiRROS: 23.02.2024; Views: 218; Downloads: 127
Full text (553,89 KB) This document has many files! More... |
4. Extending BIM for air quality monitoringMichael Nicolas Mrissa, Jan Vcelak, László Hajdu, Balázs Dávid, Miklós Ferenz Krész, Jakub Michal Sandak, Anna Malgorzata Sandak, Rok Kanduti, Monika Varkonji, Anja Jutraž, Katja Malovrh Rebec, 2020, published scientific conference contribution Abstract: As we spend more than 90% of our time inside buildings, indoor environmental quality is a major concern for healthy living. Recent studies show that almost 80% of people in European countries and the United States suffer from SBS (Sick Building Syndrome), which affects physical health, productivity and psychological well-being. In this context, environmental quality monitoring provides stakeholders with crucial information about indoor living conditions, thus facilitating building management along its lifecycle, from design, construction and commissioning to usage, maintenance and end-of-life. However, currently available modelling tools for building management remain limited to static models and lack integration capacities to efficiently exploit environmental quality monitoring data. In order to overcome these limitations, we designed and implemented a generic software architecture that relies on accessible Building Information Model (BIM) attributes to add a dynamic layer that integrates environmental quality data coming from deployed sensors. Merging sensor data with BIM allows creation of a digital twin for the monitored building where live information about environmental quality enables evaluation through numerical simulation. Our solution allows accessing and displaying live sensor data, thus providing advanced functionality to the end-user and other systems in the building. In order to preserve genericity and separation of concerns, our solution stores sensor data in a separate database available through an application programming interface (API), which decouples BIM models from sensor data. Our proof-of-concept experiments were conducted with a cultural heritage building located in Bled, Slovenia. We demonstrated that it is possible to display live information regarding environmental quality (temperature, relative humidity, CO2, particle matter, light) using Revit as an example, thus enabling end-users to follow the conditions of their living environment and take appropriate measures to improve its quality Keywords: Building Information Model, internet of things, environmental quality monitoring, healthy living Published in DiRROS: 19.01.2024; Views: 239; Downloads: 104
Full text (18,89 MB) This document has many files! More... |
5. |
6. Quality-assurance of heat-flow data: the new structure and evaluation scheme of the IHFC Global Heat Flow DatabaseSven Fuchs, Ben Norden, Florian Neumann, Norbert Kaul, Akiko Tanaka, Ilmo T. Kukkonen, Christophe Pascal, Rodolfo Christiansen, Gianluca Gola, Dušan Rajver, 2023, original scientific article Abstract: Since 1963, the International Heat Flow Commission has been fostering the compilation of the Global Heat Flow Database to provide reliable heat-flow data. Over time, techniques and methodologies evolved, calling for a reorganization of the database structure and for a reassessment of stored heat-flow data. Here, we provide the results of a collaborative, community-driven approach to set-up a new, quality-approved global heat-flow database. We present background information on how heat-flow is determined and how this important thermal parameter could be systematically evaluated. The latter requires appropriate documentation of metadata to allow the application of a consistent evaluation scheme. The knowledge of basic data (name and coordinates of the site, depth range of temperature measurements, etc.), details on temperature and thermal-conductivity data and possible perturbing effects need to be given. The proposed heat-flow quality evaluation scheme can discriminate between different quality aspects affecting heat flow: numerical uncertainties, methodological uncertainties, and environmental effects. The resulting quality codes allow the evaluation of every stored heat-flow data entry. If mandatory basic data are missing, the entry is marked accordingly. In cases where more than one heat-flow determination is presented for one specific site, and all of them are considered for the site, the poorest evaluation score is inherited to the site level. The required data and the proposed scheme are presented in this paper. Due to the requirements of the newly developed evaluation scheme, the database structure as presented in 2021 has been updated and is available in the appendix of this paper. The new quality scheme will allow a comprehensible evaluation of the stored heat-flow data for the first time. Keywords: heat-flow density, quality scheme, thermal geophysics, global heat flow database (GHFD), thermal parameter, data information system, International Heat Flow Commission (IHFC) Published in DiRROS: 09.08.2023; Views: 362; Downloads: 134
Full text (4,78 MB) |
7. Integrating geological data in Europe to foster multidisciplinary researchMarc Urvois, Sylvain Grellet, Henning Lorenz, Rainer Haener, Christelle Loiselet, Matthew Harrison, Matija Krivic, Christian Brogaard Pedersen, Marianne B. Wiese, Amelia Baptie, Martin Nayembil, James Trench, Ivor Marsh, Carlo Cipolloni, Chiara d'Ambrogi, Maria Pia Congi, 2022, original scientific article Abstract: This paper presents novel data discovery and integration, facilitated using borehole logging information with on-demand web services to produce 3D geological structures. This domain interoperability across EPOS was created for the purpose of research, but it is also highly relevant for the response to societal grand challenges such as natural hazards and climate change. European and international interoperability implementation frameworks are well described and used (e.g., INSPIRE, ISO, OGC, and IUGS/CGI). It can be difficult for data providers to deploy web services that support the full semantic data definition (e.g., OGC Complex Feature) to expose several millions of geological entities through web-enabled data portals as required by pan-European projects. Keywords: EPOS, geological information, borehole, FAIR, linked data Published in DiRROS: 19.07.2023; Views: 369; Downloads: 119
Full text (1,98 MB) |
8. Old buildings need new ideas : holistic integration of conservation-restoration process data using heritage building information modellingKatja Malovrh Rebec, Boris Deanovič, Laurens Jozef Nicolaas Oostwegel, 2022, original scientific article Abstract: The preservation of cultural heritage and the renovation, restoration and remodelling processes could benefit greatly from Building Information Modelling (BIM) workflows being established. Currently, experts are involved with fractionated workflows, where a lot of data are missing, become lost or are duplicated by different stakeholders. All the resulting confusion severely impacts on the preservation of heritage as well as the efficiency of its restoring/remodelling/revitalizing from the point of view of current needs. Heritage information is usually conveyed through conservation-restoration plans and guidelines. In this research, a new methodology for managing the information holistically integrated into the BIM is proposed. The workflow is showcased on a demo-case building that is protected as cultural heritage. Consequently, the conservation plan becomes more accessible, not only for stakeholders in heritage, but also stakeholders responsible for the renovation, such as architects and contractors. This can result in an improved understanding of the heritage and a better revitalization. Keywords: heritage building information modelling (HBIM), conservation plan, digitisation, revitalization Published in DiRROS: 07.06.2023; Views: 323; Downloads: 260
Full text (3,76 MB) This document has many files! More... |
9. |
10. Social context as a pillar of sustainable forest management - a Slovenian caseNevenka Bogataj, 2009, original scientific article Abstract: Social context as more or less neglected field of sustainable development is crucial for the implementation of forest management measures. We can consider it as a basis to cope with (changing) structure characteristics. Realisation of public services, which we face when coping with economic crisis, might take this into consideration. The Forest Service network serves as a scanner of needs in their social context. It is also a respondent to local specifics in the form of forest management measures. Evidence of research on the social research in Slovenian forestry is weak, although not non-existent. We tested asystem approach, a structuring method of general public. Segmentation, a method presented, is generally known in marketing and has not been used in Slovenian forestry up to now. The two-step clustering analysis of quantitative data gathered with an inquiry of study circles (form of community learning) was used and is described herewith. The results show three general value based segments of study circle participants. The role of Slovenian foresty is changing and is not independent of its dynamic and colourful social contexts, Recognition of the society structure and dynamics may contribute to the rationalisation of organisational models during the crisis period. Hoewer, grounded actualisation of recent organisational models is possible only by considering priorities of the society's segments. We conclude with suggestion for more R&D engagement in the social pillar of multifunctional forest management, in particular as the Slovenian social context is defined by dominance of private property and forest owners' ageing, which are far from being analysed and responded to. Keywords: forestry, sustainable development, structure of society, segmentation, information flow, knowledge flow Published in DiRROS: 12.07.2017; Views: 4789; Downloads: 1979
Full text (309,11 KB) |