811. Reviewing the modeling aspects and practices of shallow geothermal energy systemsPaul Christodoulides, Ana Vieira, Stanislav Lenart, João Maranha, Gregor Vidmar, Rumen Popov, Aleksandar Georgiev, Lazaros Aresti, Georgios Florides, 2020, review article Abstract: Shallow geothermal energy systems (SGES) may take different forms and have recently taken considerable attention due to energy geo-structures (EGS) resulting from the integration of heat exchange elements in geotechnical structures. Still, there is a lack of systematic design guidelines of SGES. Hence, in order to contribute towards that direction, the current study aims at reviewing the available SGES modeling options along with their various aspects and practices. This is done by first presenting the main analytical and numerical models and methods related to the thermal behavior of SGES. Then, the most important supplementary factors affecting such modeling are discussed. These include: (i) the boundary conditions, in the form of temperature variation or heat flow, that majorly affect the predicted thermal behavior of SGES; (ii) the spatial dimensions that may be crucial when relaxing the infinite length assumption for short heat exchangers such as energy piles (EP); (iii) the determination of SGES parameters that may need employing specific techniques to overcome practical difficulties; (iv) a short-term vs. long-term analysis depending on the thermal storage characteristics of GHE of different sizes; (v) the influence of groundwater that can have a moderating effect on fluid temperatures in both heating and cooling modes. Subsequently, thermo-mechanical interactions modeling issues are addressed that may be crucial in EGS that exhibit a dual functioning of heat exchangers and structural elements. Finally, a quite lengthy overview of the main software tools related to thermal and thermo-hydro-mechanical analysis of SGES that may be useful for practical applications is given. A unified software package incorporating all related features of all SGES may be a future aim.
Keywords: shalow geothermal energy systems, energy geo-structures, thermal analysis, thermo-hydro-mechanical, modelling, software tools
Published in DiRROS: 05.03.2024; Views: 288; Downloads: 100
 Full text (3,10 MB)
This document has many files! More... |
812. Metal–support interaction between titanium oxynitride and Pt nanoparticles enables efficient low-Pt-loaded high-performance electrodes at relevant oxygen reduction reaction current densitiesArmin Hrnjić, Ana Rebeka Kamšek, Lazar Bijelić, Anja Logar, Nik Maselj, Milutin Smiljanić, Jan Trputec, Natan Vovk, Luka Pavko, Francisco Ruiz-Zepeda, Marjan Bele, Primož Jovanovič, Nejc Hodnik, 2024, original scientific article Published in DiRROS: 04.03.2024; Views: 231; Downloads: 92
Full text (1,90 MB)
This document has many files! More... |
813. On a continuation of quaternionic and octonionic logarithm along curves and the winding numberGraziano Gentili, Jasna Prezelj, Fabio Vlacci, 2024, original scientific article Abstract: This paper deals with the problem of finding a continuous extension of the hypercomplex (quaternionic or octonionic) logarithm along (quaternionic or octonionic) paths which avoid the origin. The main difficulty depends upon this fact: while a branch of the complex logarithm can be defined in a small open neighbourhood of a strictly negative real point, no continuous branch of the hypercomplex logarithm can be defined in any open set which contains a strictly negative real point. To overcome this difficulty, we use the logarithmic manifold: in general, the existence of a lift of a path to this manifold is not guaranteed and, indeed, the problem of lifting a path to the logarithmic manifold is completely equivalent to the problem of finding a continuation of the hypercomplex logarithm along this path. The second part of the paper scrutinizes the existence of a notion of winding number (with respect to the origin) for hypercomplex loops that avoid the origin, even though it is known that the definition of winding number for such loops is not natural in ${\mathbb R}^n$ when $n$ is greater than $2$. The surprise is that, in the hypercomplex setting, the new definition of winding number introduced in this paper can be given and has full meaning for a large class of hypercomplex loops (untwisted loops with companion that avoid the origin). Finally an original but rather natural notion of homotopy for these hypercomplex loops (the $c$-homotopy) is presented and it is proved to be suitable to comply with the intrinsic geometrical meaning of the winding number for this class of loops, namely, two such hypercomplex loops are $c$-homotopic if, and only if, they have the same winding number.
Keywords: hypercomplex logarithm, continuation of the hypercomplex logarithm along paths, winding number
Published in DiRROS: 04.03.2024; Views: 260; Downloads: 107
Full text (720,93 KB)
This document has many files! More... |
814. |
815. |
816. Thermal insulation and flammability of composite waste polyurethane foam encapsulated in geopolymer for sustainable building envelopeBarbara Horvat, Nataša Knez, Uroš Hribar, Jakob Koenig, Branka Mušič, 2024, original scientific article Abstract: Polyurethane foam (PUR) is a lightweight, thermally insulating, widely used, and highly flammable material that has after its use an adverse effect on the environment, i.e., PUR disposal is considered hazardous. Its flammability can be mitigated using various fire retardants, but they do not change the hazardous nature of waste PUR. Therefore, in the current study, waste PUR with and without flame retardants based on N and P was incorporated into a geopolymer, the alkali-activated material (AAM) based solely on metakaolin, to evaluate the potential recycling route of waste PUR while taking into account its flammability, so it can enter safely into the circular economy through the building industry. To enhance the mechanical properties of the composite, a fresh mixture was irradiated with microwaves. However, the irradiation of geopolymer containing PUR negatively influenced mechanical performance, which led to the evaluation of the behaviour of the complex dielectric constant of PUR and fire retardants. Materials and composites were evaluated regarding their chemistry, mineralogy, microstructure, and porosity to connect the structure with extrinsic properties like geometrical density, thermal conductivity, and fire properties. Nonetheless, positive influences of PUR being encapsulated in the geopolymer were lowered density (from 1.8 to 1.6 kg/l) and improved thermal insulation ability (from 940 to 860 mW/(m·K)) of the composites: with the inclusion of <5 % of PUR, thermal insulation improved by nearly 10 %. However, the contribution of PUR to the composite originated from its skeleton, which has more than 15 times bigger geometrical density (0.81 kg/l) compared to the density of the skeleton (0.047 kg/l). This offers an open field for further advancements of thermal properties, but would also lead to a decrease of the compressive strength, which was already lowered from 90 MPa for 30 % with <5 % of added grated PUR. Furthermore, the flammable nature of PUR and its other drawbacks can be controlled by permanent embedding in the noncombustible structure of geopolymer, making the envelope of sustainable buildings green and safer. Overall, including grated waste PUR in geopolymer represents a promising, easy, cost-effective recycling path with low energy consumption, where the composite cannot develop fire on a scale of pure PUR, even in the worst-case scenario, but only if the composite is designed in a way, that flammable materials cannot join flames during their combustion. This paper gives prospects to other flammable waste materials to be safely used in the circular economy, and to porous materials to shape properties of the composite by their intrinsic and/or extrinsic properties.
Keywords: waste polyurethane foam, polymeric flame retardants, alkali activated material, metakaolin, microwave irradiation, thermal-fire behaviour, mechanical strength
Published in DiRROS: 01.03.2024; Views: 496; Downloads: 613
Full text (29,74 MB)
This document has many files! More... |
817. Foundry wastes as a potential precursor in alkali activation technologyBarbara Horvat, Alenka Sešek Pavlin, Vilma Ducman, 2020, published scientific conference contribution Abstract: In this study the amount of amorphous phase of elements useful in alkali activation of waste materials produced by the foundry industry was determined. Waste foundry sands, foundry flue gas and waste casting cores were alkali activated, and waste green ceramics and bottom ash were added to one of the foundry sand samples to shorten the time for producing measurable compressive strength from 1.5 years to 1 week.
Keywords: alkali activated materials, foundry wastes, compressive strength, upcycling, circular ecnomy
Published in DiRROS: 01.03.2024; Views: 214; Downloads: 218
 Link to file
This document has many files! More... |
818. B-IMPACT project : eco-friendly and non-hazardous coatings for the protection of outdoor bronzesGiulia Masi, Maëlenn Aufray, A. Balbo, E. Bernardi, Maria Chiara Bignozzi, Cristina Chiavari, J. Esvan, Nina Gartner, V. Grassi, Claudie Josse, Tadeja Kosec, Carla Martini, Cecilia Monticelli, Luka Škrlep, W. Sperotto, Erika Švara Fabjan, E. Tedesco, F. Zanotto, Luc Robbiola, 2020, published scientific conference contribution Abstract: Application of protective coatings is the most widely used conservation treatment for outdoor bronzes. Eco-friendly and non-hazardous coatings are currently needed for conservation of outdoor bronze monuments. To fulfil this need, the M-ERA.NET European research project B-IMPACT (Bronze-IMproved non-hazardous PAtina CoaTings) aimed at assessing the protectiveness of innovative coatings for historical and modern bronze monuments exposed outdoors.
In this project, two bronze substrates (historical Cu-Sn-Zn-Pb and modern Cu-Si-Mn alloys) were artificially patinated, by acid rain solution using dropping test and by "liver of sulphur" procedure (K2S aqueous solution) to obtain black patina, respectively. Subsequently, the application of several newly developed protective coatings was carried out and their performance was investigated by preliminary electrochemical tests. In the following steps of the work, the assessment of the best-performing coatings was carried out and their performance was compared to Incralac, one of the most widely used protective coatings in conservation practice. A multi-analytical approach was adopted, considering artificial ageing (carried out in representative conditions, including exposure to rain runoff, stagnant rain and UV radiation) and metal release, as well as visual aspect (so as to include aesthetical impact among the coating selection parameters) and morphological and structural evolution of the coated surfaces due to simulated outdoor exposure. Lastly, also the health impact of selected coatings was assessed by occupational hazard tests. The removability and re-applicability of the best-performing coatings were also assessed. The best alternatives to the conventional Incralac exhibited were: (i) fluoroacrylate blended with methacryloxy-propyl-trimethoxy-silane (FA-MS) applied on patinated Cu-Sn-Zn-Pb bronze and (ii) 3-mercapto-propyl-trimethoxysilane (PropS-SH) applied on patinated Cu-Si-Mn bronze.
Keywords: bronze, patina, protective coatings, eco-friendly, corrosion, aging
Published in DiRROS: 01.03.2024; Views: 201; Downloads: 105
Full text (2,01 MB)
This document has many files! More... |
819. The deformation of alkali-activated materials at different curing temperaturesMark Češnovar, Katja Traven, Vilma Ducman, 2020, published scientific conference contribution Abstract: Alkali activation is a chemical process whereby materials rich in aluminosilicate, which dissolves in basic media at room temperature, form binding phases by polycondensation. The alkali- activated materials (AAM) are a promising alternative to binding materials such as cement or other products in civil engineering (van Deventer et al., 2012). This study investigates the early age shrinkage behavior of Slovenian ladle and electric arc furnace slag - based alkali activated materials at different curing temperatures. The dimensions of specimens cured at room temperature and elevated temperatures up to 90 °C were measured over the first 7 hours (every 10 min). The results show that the most shrinkage occurred at the highest temperature, owing to the highest rate of evaporation of liquid content. Loss of mass follows from the drying shrinkage.
Keywords: alkali activated materials, shrinkage, compressive strength
Published in DiRROS: 01.03.2024; Views: 318; Downloads: 412
Full text (670,52 KB)
This document has many files! More... |
820. Delavnica Smernice za gospodarjenje z gozdovi na hudourniških območjih v luči nedavnih ujm na Gozdarskem inštitutu SlovenijeUrša Vilhar, Andrej Breznikar, Andreja Gregorič, Gregor Danev, Boris Rantaša, Jaša Saražin, David Štefanič, Jože Papež, 2023, professional article Keywords: gospodarjenje z gozdovi, urejanje hudournikov
Published in DiRROS: 29.02.2024; Views: 306; Downloads: 73
Full text (242,96 KB) |
