11. Ultrasound-guided aspiration biopsy of subclinical regional metastases of head and neck carcinomaAlenka Višnar-Perovič, Aleksandar Aničin, Živa Zupančič, Bojana Černelč, Alojz Šmid, Dubravka Vidmar, Milan Gorenc, 2000, original scientific article Abstract: Background. Studies concerned with the estimation of ultrasound (US) combined with ultrasound-guided aspiration biopsy (USGAB) in the detection of subclinical regional metastases from the planocellular carcinoma of head and neck are promising, but in few cases. Recently, the authors have pointed out the role of lymph node size parameters in order to decide about the use of USGAB. The aim of this study was to test the reliability of US-USGAB for the detection of subclinical regional metastases in patients with planocellular head and neck carcinomas, including the evaluation of lymph node size parameters. Patients and methods. 121 neck sides with no palpable metastases were examined by US in 77 patients with planocellular carcinomas of head and neck. Depending on the results obtained, USGAB was performed on 64 neck sides.After surgery, the results of US-USGAB were compared with histological findings of the dissected lymph nodes. Results. The study showed 77% overall sensitivity of US and USGAB, and 100% specificity, while the versal / longiyudinal diameter was the best predictor of metastatic lymph node involvement. Conclusion. The results of this study established that USGAB is an appropriate method for detection the subclinical regional metastases on neck, and should be included into routine diagnostic work up in the evaluationof the extent of head and necks carcinomas.
Published in DiRROS: 24.01.2024; Views: 217; Downloads: 53
 Full text (415,17 KB) |
12. Bone marrow toxicity and antitumor action of adriamycin in relation to the antioxidant effects of melatoninValentina Rapozzi, Laura Perissin, Sonja Zorzet, Marina Comelli, Irene Mavelli, Marjeta Šentjurc, Alja Pregelj, Milan Valter Schara, Tullio Giraldi, 1998, original scientific article Published in DiRROS: 19.01.2024; Views: 231; Downloads: 52
Full text (1,73 MB) |
13. |
14. |
15. Corrosion properties of aluminized 16Mo3 steelBlaž Karpe, Klara Prijatelj, Milan Bizjak, Tadeja Kosec, 2023, original scientific article Abstract: Chromium-molybdenum steel (16Mo3) is widely used in petroleum, gas, automotive, and construction industries due to its good oxidation resistance and mechanical properties at moderately elevated temperatures. The aim of the research was to evaluate the corrosion susceptibility of 16Mo3 steel in hot rolled and aluminized states. Aluminization was performed by diffusion pack aluminization process at 900°C/2h and 730°C/4h, respectively. Electrochemical corrosion testing included measuring open circuit potential (EOCP), linear polarization resistance (LPR), potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) in potassium phosphate buffer (KH2PO4, pH = 7). Optical microscopy (OM), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS) were used for surface layer microstructure characterization before and after corrosion tests. It was demonstrated that corrosion resistance of aluminized steel increased substantially. Corrosion properties were related to the structure and properties of intermetallic phase (FeAl, FeAl2 and Fe2Al5) that formed on the surface of 16Mo3 steel.
Keywords: aluminide coatings, aluminized steel, aluminizing, electrochemical corrosion investigation, 16Mo3 steel
Published in DiRROS: 16.11.2023; Views: 427; Downloads: 212
Full text (4,40 MB)
This document has many files! More... |
16. Strižna trdnost spojev z ribjim klejem lepljenega lesa ovrednotena z metodo ABESMatic Sitar, Andreja Pondelak, Samo Grbec, Milan Šernek, 2023, original scientific article Abstract: V prispevku smo s pomočjo sistema za avtomatizirano vrednotenje zlepljenosti (ABES) ugotavljali razvoj strižne trdnosti ribjega kleja pri lepljenju lesa. Uporabili smo bukov (Fagus sylvatica L.) furnir, ki smo ga lepili pri konstantnem tlaku 12 barov, medtem ko smo spreminjali temperaturo in čas stiskanja. Temperatura je znašala med25 °C in 100 °C, z intervalom 25 °C, čas stiskanja pa od 1 minute do 60 minut. Dosežena maksimalna strižna trdnost je znašala okoli 10 N/mm², dosegli smo jo pri vseh štirih proučevanih temperaturah stiskanja. Na podlagi rezultatov študije smo ugotovili, da strižna trdnost ribjega kleja pri različnih temperaturah segrevanja neenakomerno narašča. Pri višjih temperaturah segrevanja hitreje dosežemo maksimalne strižne trdnosti. Strižne trdnosti spoja lepila iz ribjega kleja smo ugotavljali tudi po standardih EN 204 in EN 205.
Keywords: wood
Published in DiRROS: 14.11.2023; Views: 367; Downloads: 194
Full text (2,41 MB)
This document has many files! More... |
17. |
18. Značaj kombinacije savremenih dijagnostičkih metoda u diferenciranoj dijagnostici tumora štitnjačeMarija Auersperg, Jožica Červek, Marjan Erjavec, Rastko Golouh, Marinka Kremžar, Janez Lamovec, Marija Us-Krašovec, Jurij Us, Franci-Stanko Marolt, Jasna Sever, Janez Novak, Miran Porenta, Marija Snežna Paulin-Košir, Ivana Levstik, Milan Valter Schara, Marjeta Šentjurc, 1977, original scientific article Published in DiRROS: 14.09.2023; Views: 316; Downloads: 104
Full text (898,23 KB) |
19. |
20. Monitoring and control of forest seedling quality in EuropeMilan Mataruga, Branislav Cvjetković, Bart De Cuyper, Ina Aneva, Petr Zhelev, Pavel Cudlin, Marek Metslaid, Ville Kankaanhuhta, Catherine Collet, Peter Annighöfer, Gregor Božič, Hojka Kraigher, 2023, original scientific article Abstract: The relationship between the quality of forest seedlings and their outplanting survival and growth has long been recognized. Various attributes have been proposed to measure the quality of planted seedlings in forest regeneration projects, ranging from simple morphological traits to more complex physiological and performance attributes, or a combination thereof. However, the utility and meaning of seedling quality attributes can differ significantly among regions, nursery practices, site planting conditions, species and the establishment purpose. Here, forest scientists compiled information using a common agreed questionnaire to provide a review of current practices, experiences, legislation and standards for seedling quality across 23 European countries.
Large differences exist in measuring seedling quality across countries. The control of the origin of seed and vegetative material (genetic component of plant quality), and control of pests and diseases are common practices in all countries. Morphological attributes are widely used and mandatory in most cases. However, physiological attributes are hardly used at the operative level and mainly concentrated to Fennoscandia. Quality control legislation and seedling quality standards are less strict in northern European countries where seedling production is high, and quality control relies more on the agreements between producers and local plant material users. In contrast, quality standards are stricter in Southern Europe, especially in the Mediterranean countries.
The control of seedling quality based on plantation and reforestation success is uncommon and depends on the conditions of the planting site, the traditional practices and the financial support provided by each country. Overall, European countries do not apply the “target seedling concept” for seedling production except for seed origin. Seedling production in many countries is still driven by traditional “know-how” and much less by scientific knowledge progress, which is not adequately disseminated and transferred to the end-users.
Our review highlights the need for greater harmonization of seedling quality practices across Europe and the increased dissemination of scientific knowledge to improve seedling quality in forest regeneration activities.
Keywords: forest nursery, forestation, legislation, morphological and physiological quality, standards, forest reproductive material, FRM
Published in DiRROS: 04.09.2023; Views: 369; Downloads: 200
 Link to file
This document has many files! More... |
