101. Quality control of thermally modified timber using dynamic vapor sorption (DVS) analysisMiha Humar, Rožle Repič, Davor Kržišnik, Boštjan Lesar, Romana Cerc Korošec, Christian Brischke, Lukas Emmerich, Gregor Rep, 2020, izvirni znanstveni članek Povzetek: The importance of thermal modification is increasing worldwide. Increased use of thermally modified timber (TMT) has resulted in a need for reliable quality control, comprising control of variation of the production within defined limits, allowing third-party control in the case of certification and the regulation of customer complaints and claims. Techniques are thus needed to characterise the modification of quality in terms of improved target properties of TMT during industrial production, and of TMT products that have been in service for an arbitrary time. In this study, we aimed to utilise dynamic vapor sorption (DVS) for this purpose. Norway spruce (Picea abies) and European beech (Fagus sylvatica) samples were thermally modified at different temperatures according to different heat treatment techniques: (1) the Silvapro process based on an initial vacuum; (2) an air heat treatment, whereby samples were wrapped in aluminium foil; (3) thermal modification of wood samples in the ambient atmosphere in a laboratory oven. Wood samples from closed processes were analysed for validation. TMT was characterised with respect to mass loss, colour and density. Mass loss of wood due to modification (MLTM) was correlated with factors derived from DVS analysis. The present DVS measurements suggest that the equilibrium wood moisture content (EMC95% RH), the time to reach 10% wood moisture content (t10% MC), and the elongation factor, c, derived from a logarithmic function, can serve as alternative parameters to characterise the quality of several thermal modification processes. Further studies are recommended using other wood species, different modification processes and further parameters gained from DVS measurements to understand the robustness and the predictive power of the applied technique
Ključne besede: thermal modification, quality control, dynamic vapour sorption, wood, moisture content
Objavljeno v DiRROS: 31.08.2023; Ogledov: 284; Prenosov: 144
 Celotno besedilo (1,91 MB)
Gradivo ima več datotek! Več... |
102. Depassivation and repassivation of stainless steels by stepwise pH changeEmir Mujanović, Bojan Zajec, Andraž Legat, Tadeja Kosec, Janez Kovač, Gregor Mori, Stefan Hönig, Gerald Zehethofer, 2020, izvirni znanstveni članek Povzetek: Immersion tests with different stainless steels have been performed, while the pH was stepwise decreased and then increased again. During 8.5-day exposure, the depassivation and repassivation pH values as a function of pitting resistance equivalent number were determined. There is always a gap between both pH values (depassivation and repassivation), indicating that for every steel, there are conditions where an existing passive layer can be maintained but cannot be rebuilt after depassivation. In such environments, the passive layer is thicker, consisting mainly of molybdenum and iron rich oxides, while chromium is dissolved. Usually, depending on conditions, the passive layer is more chromium-rich, especially the inner layer. This is relevant, for example, for acidizing jobs in oil and gas industry, proving that repassivation after acidizing will happen promptly, when the pH is increased again.
Ključne besede: stress corrosion cracking, surface finish impact, tapered tensile specimen, autoclave, accelerated testing, light water nuclear reactor, critical threshold stress
Objavljeno v DiRROS: 30.08.2023; Ogledov: 299; Prenosov: 153
Celotno besedilo (4,01 MB)
Gradivo ima več datotek! Več... |
103. Recombination of oxygen atoms on the surface of oxidized polycrystalline nickel—temperature and pressure dependencesDomen Paul, Miran Mozetič, Rok Zaplotnik, Jernej Ekar, Alenka Vesel, Gregor Primc, Denis Đonlagić, 2023, izvirni znanstveni članek Povzetek: The recombination of neutral oxygen atoms in the ground state on the oxidized nickel samples was studied experimentally in the range of pressures where the maximum density occurs in weakly ionized low-pressure oxygen plasma, i.e. between 40 and 200 Pa. The recombination coefficient was determined in the flowing afterglow. The source of oxygen atoms was plasma sustained in a quartz tube of inner diameter 4.7 mm by a microwave discharge in the surfatron mode. The recombination coefficient was determined in the afterglow chamber, which was a Pyrex tube with an inner diameter of 36 mm. The density of oxygen atoms in the afterglow chamber was varied by adjusting the discharge power, the gas flow, the pressure, and the position of a recombinator. Such flexibility of the experimental system enabled adjustment of the temperature of the oxidized nickel samples independently from the O-atom density in its vicinity or other parameters. The density of oxygen atoms in the afterglow chamber at various system parameters was determined by the Šorli method, which is reliable, and has an accuracy of about 20%. The recombination coefficient was determined by calorimetry. The coefficient was inversely proportional to the square root of the pressure and exponentially to the sample temperature. Systematic measurements performed at various pressures and temperatures enabled empirical formula, which were explained qualitatively by recombination kinetics.
Ključne besede: heterogenous surface recombination, recombination coefficient, nickel, nickel oxide, temperature
Objavljeno v DiRROS: 30.08.2023; Ogledov: 324; Prenosov: 191
Celotno besedilo (2,44 MB)
Gradivo ima več datotek! Več... |
104. Loss of oxygen atoms on well-oxidized cobalt by heterogeneous surface recombinationDomen Paul, Miran Mozetič, Rok Zaplotnik, Jernej Ekar, Alenka Vesel, Gregor Primc, Denis Đonlagić, 2023, izvirni znanstveni članek Povzetek: Calorimetry is a commonly used method in plasma characterization, but the accuracy of the method is tied to the accuracy of the recombination coefficient, which in turn depends on a number of surface effects. Surface effects also govern the kinetics in advanced methods such as atomic layer oxidation of inorganic materials and functionalization of organic materials. The flux of the reactive oxygen atoms for the controlled oxidation of such materials depends on the recombination coefficient of materials placed into the reaction chamber, which in turn depends on the surface morphology, temperature, and pressure in the processing chamber. The recombination coefficient of a well-oxidized cobalt surface was studied systematically in a range of temperatures from 300 to 800 K and pressures from 40 to 200 Pa. The coefficient increased monotonously with decreasing pressure and increasing temperature. The lowest value was about 0.05, and the highest was about 0.30. These values were measured for cobalt foils previously oxidized with oxygen plasma at the temperature of 1300 K. The oxidation caused a rich morphology with an average roughness as deduced from atomic force images of 0.9 µm. The results were compared with literature data, and the discrepancy between results reported by different authors was explained by taking into account the peculiarities of their experimental conditions.
Objavljeno v DiRROS: 25.08.2023; Ogledov: 312; Prenosov: 150
Celotno besedilo (3,59 MB)
Gradivo ima več datotek! Več... |
105. RILEM TC 247-DTA round robin test : carbonation and chloride penetration testing of alkali-activated concretesGregor J. G. Gluth, Kamel Arbi, Susana Bernal, Dali Bondar, Arnaud Castel, Sundararaman Chithiraputhiran, Alireza Dehghan, Katja Dombrowski-Daube, Ashish Dubey, Vilma Ducman, Karl Peterson, Penny Pipilikaki, Siska L. A. Valcke, Guang Ye, Yibing Zuo, John L. Provis, 2020, izvirni znanstveni članek Povzetek: Many standardised durability testing methods have been developed for Portland cement-based concretes, but require validation to determine whether they are also applicable to alkali-activated materials. To address this question, RILEM TC 247-DTA "Durability Testing of Alkali-Activated Materials" carried out round robin testing of carbonation and chloride penetration test methods, applied to five different alkali-activated concretes based on fly ash, blast furnace slag or metakaolin. The methods appeared overall to demonstrate an intrinsic precision comparable to their precision when applied to conventional concretes. The ranking of test outcomes for pairs of concretes of similar binder chemistry was satisfactory, but rankings were not always reliable when comparing alkali-activated concretes based on different precursors. Accelerated carbonation testing gave similar results for fly ash-based and blast furnace slag-based alkali-activated concretes, whereas natural carbonation testing did not. Carbonation of concrete specimens was observed to have occurred already during curing, which has implications for extrapolation of carbonation testing results to longer service life periods. Accelerated chloride penetration testing according to NT BUILD 443 ranked the tested concretes consistently, while this was not the case for the rapid chloride migration test. Both of these chloride penetration testing methods exhibited comparatively low precision when applied to blast furnace slag-based concretes which are more resistant to chloride ingress than the other materials tested.
Ključne besede: alkali-activated materials (AAM), carbonatization, chloride penetration, Rilem TC, durability
Objavljeno v DiRROS: 17.08.2023; Ogledov: 250; Prenosov: 169
Celotno besedilo (1014,30 KB)
Gradivo ima več datotek! Več... |
106. RILEM TC 247-DTA round robin test : sulfate resistance, alkali-silica reaction and freeze-thaw resistance of alkali-activated concretesFrank Winnefeld, Gregor J. G. Gluth, Susana Bernal, Maria Chiara Bignozzi, Lorenza Carabba, Sundararaman Chithiraputhiran, Alireza Dehghan, Sabina Dolenec, Katja Dombrowski-Daube, Ashish Dubey, Vilma Ducman, Yu Jin, Karl Peterson, Stephen Dietmar, John L. Provis, 2020, izvirni znanstveni članek Povzetek: The RILEM technical committee TC 247-DTA ‘Durability Testing of Alkali-Activated Materials’ conducted a round robin testing programme to determine the validity of various durability testing methods, originally developed for Portland cement based-concretes, for the assessment of the durability of alkali-activated concretes. The outcomes of the round robin tests evaluating sulfate resistance, alkali-silica reaction (ASR) and freeze–thaw resistance are presented in this contribution. Five different alkali-activated concretes, based on ground granulated blast furnace slag, fly ash, or metakaolin were investigated. The extent of sulfate damage to concretes based on slag or fly ash seems to be limited when exposed to an Na2SO4 solution. The mixture based on metakaolin showed an excessive, very early expansion, followed by a dimensionally stable period, which cannot be explained at present. In the slag-based concretes, MgSO4 caused more expansion and visual damage than Na2SO4; however, the expansion limits defined in the respective standards were not exceeded. Both the ASTM C1293 and RILEM AAR-3.1 test methods for the determination of ASR expansion appear to give essentially reliable identification of expansion caused by highly reactive aggregates. Alkali-activated materials in combination with an unreactive or potentially expansive aggregate were in no case seen to cause larger expansions; only the aggregates of known very high reactivity were seen to be problematic. The results of freeze–thaw testing (with/without deicing salts) of alkali-activated concretes suggest an important influence of the curing conditions and experimental conditions on the test outcomes, which need to be understood before the tests can be reliably applied and interpreted.
Ključne besede: alkali-activated materials/geopolymers, sulphate resistance, alkali silica reactivity, freeze-thaw resistance, Rilem TC
Objavljeno v DiRROS: 17.08.2023; Ogledov: 220; Prenosov: 160
Celotno besedilo (560,56 KB)
Gradivo ima več datotek! Več... |
107. Poročilo : starost in anatomija skorje posebne smreke s hrastovo skorjo iz Kočevskega rogaJožica Gričar, Gregor Skoberne, Gregor Božič, 2023, elaborat, predštudija, študija Ključne besede: Picea abies, lubje, periderm, floem, felogen
Objavljeno v DiRROS: 16.08.2023; Ogledov: 271; Prenosov: 93
Celotno besedilo (1,87 MB) |
108. |
109. |
110. Priporočila za obravnavo bolnikov s pljučnim rakomMartina Vrankar, Nina Boc, Izidor Kern, Aleš Rozman, Karmen Stanič, Tomaž Štupnik, Mojca Unk, Maja Ebert Moltara, Vesna Zadnik, Katja Adamič, Jernej Benedik, Marko Bitenc, Jasna But-Hadžić, Anton Crnjac, Marina Čakš, Dominik Časar, Eva Ćirić, Tanja Čufer, Ana Demšar, Rok Devjak, Goran Gačevski, Marta Globočnik Kukovica, Kristina Gornik-Kramberger, Maja Ivanetič Pantar, Marija Ivanović, Urška Janžič, Staša Jelerčič, Veronika Kloboves-Prevodnik, Mile Kovačević, Luka Ležaič, Mateja Marc-Malovrh, Katja Mohorčič, Loredana Mrak, Igor Požek, Nina Turnšek, Bogdan Vidmar, Dušanka Vidovič, Gregor Vlačić, Ana Lina Vodušek, Rok Zbačnik, Ivana Žagar, 2023, strokovni članek Povzetek: Leta 2019 so bila objavljena Priporočila za obravnavo bolnikov s pljučnim rakom, ki so v slovenski prostor vnesla prepotrebno poenotenje diagnostike in zdravljenja z namenom izboljšanja preživetja bolnikov s pljučnim rakom. Posodobitev Priporočil tri leta po izidu izvirnika prinaša največ novosti v poglavju o sistemskem zdravljenju bolnikov s pljučnim rakom. To kaže na izjemen napredek na področju razumevanja onkogeneze in biologije pljučnega raka ter s tem razvoja novih zdravil. Breme pljučnega raka ostaja veliko, saj je pljučni rak pri nas in v svetu še vedno najpogostejši vzrok smrti zaradi raka. Za vsako peto smrt zaradi raka je odgovoren pljučni rak. Skoraj tretjina bolnikov s pljučnim rakom ne prejme specifičnega onkološkega zdravljenja, bodisi zaradi slabega stanja zmogljivosti, spremljajočih bolezni ali obsega bolezni. Polovica bolnikov ima ob diagnozi razsejano bolezen, zaradi česar izboljšanje preživetja z malimi koraki sledi napredku v zdravljenju bolnikov s pljučnim rakom. Ti podatki nas opominjajo, da se bomo morali za velike premike v obravnavi bolnikov s pljučnim rakom lotiti drugačnih pristopov. Kot najbolj obetavno se ponuja zgodnje odkrivanje bolezni, ko so možnosti ozdravitve pljučnega raka najboljše. Zapisana Priporočila so usmeritev za obravnavo bolnikov s pljučnim rakom. Le s sodobnim multidisciplinarnim pristopom obravnave lahko bolniku ponudimo zdravljenje, ki mu omogoča najboljši izhod prognostično neugodne bolezni.
Ključne besede: pljučni rak, priporočila
Objavljeno v DiRROS: 27.07.2023; Ogledov: 382; Prenosov: 136
Celotno besedilo (708,18 KB)
Gradivo ima več datotek! Več... |
