1. The effect of heat treatment on the interface of 155 PH martensitic stainless steel and SAF 2507 duplex steel in functionally graded AM componentsMartina Koukolíková, Pavel Podaný, Sylwia Rzepa, Michal Brázda, Aleksandra Kocijan, 2023, izvirni znanstveni članek Povzetek: Multi-material components, also known as functionally graded materials (FGMs), are innovative materials that possess unique properties due to their composition and have many potential applications in engineering and science. The effect of the heat treatment (HT) of functionally graded materials 15–5 precipitation-hardened (PH) martensitic steel and SAF 2507 duplex stainless steel (and the opposite order of deposition, i.e. SAF 2507 first followed by 15–5 PH stainless steel) on the interface microstructures was systematically investigated in the presented research. The choice of HT followed the trend of optimum post-processing for the individual alloys. A significant modification in the interface microstructure, characterized in the microstructural transition zone (MTZ) formed above the fusion line. Mechanical properties by miniaturized testing method including hardness measurement characterized both types of interfaces. The sequence of the materials’ application did not have a significant effect on their final mechanical tensile properties in the heat-treated states. Nevertheless, the microstructural change at the MTZ led to drop in the hardness at the interface. The research presents heat-treated FGMs in a horizontal configuration to form a high-quality metallurgical joint between heterogeneous materials manufactured by powder-based directed energy deposition method.
Ključne besede: heat treatment, additive manufacturing, martensitic stainless steel, duplex steel, microstructure, mechanical properties
Objavljeno v DiRROS: 04.04.2024; Ogledov: 56; Prenosov: 12
 Povezava na datoteko |
2. Use of plasma nitriding to improve the wear and corrosion resistance of 18Ni-300 maraging steel manufactured by selective laser meltingMatjaž Godec, Bojan Podgornik, Aleksandra Kocijan, Črtomir Donik, Danijela Anica Skobir Balantič, 2021, izvirni znanstveni članek Ključne besede: selective laser melting, 18Ni-300 maraging steel, heat treatment, plasma nitriding, retained and reverted austenite, wear and corrosion behaviour
Objavljeno v DiRROS: 25.03.2024; Ogledov: 86; Prenosov: 51
 Celotno besedilo (3,37 MB)
Gradivo ima več datotek! Več... |
3. Effect of steel’s thermal condition on the transformation temperatures of two hot-work tool steels with increased thermal conductivity : Tilen Balaško, Jaka Burja, Jožef MedvedTilen Balaško, Jaka Burja, Jože Medved, 2023, izvirni znanstveni članek Ključne besede: thermal analysis, hot-work tool steels, differential scanning calorimetry, heat treatment
Objavljeno v DiRROS: 08.03.2024; Ogledov: 85; Prenosov: 46
Celotno besedilo (3,08 MB)
Gradivo ima več datotek! Več... |
4. Effect of heat treatment on thermal conductivity of additively manufactured AISI H13 tool steelSamo Tome, Blaž Karpe, Irena Paulin, Matjaž Godec, 2024, objavljeni znanstveni prispevek na konferenci Povzetek: AISI H13 is commonly used for tooling, where higher wear resistance, thermal fatigue resistance, or hot toughness is required. Such examples include forging dies, plastic molds, hot shear blades, high-pressure die casting, and extrusion dies. Thus, thermal conductivity is one of the most important factors for hot work tools. Typically, the work cycle of a hot work tool designed for forging consists of four main phases: the forging stroke, with which the die imparts its shape onto the part, a brief pause while the die is reset to its original position, a lubrication phase, and a post lubrication dwell phase. During the forging phase, a significant amount of heat is transferred to the die while it is in contact with the part. This heat must then be dispelled for the part to return to a working temperature. While somewhat different, other hot work processes mentioned above are similar in that the hot work tool gets heated to a high temperature due to the contact with the object of deformation. The process of additive manufacturing (AM) promises better, more efficient tool production with features like conforming cooling channels, which would reduce the thermal fatigue of tools, prolonging tool life. However, the powder bed fusion (PBF) method creates a columnar microstructure, which has a detrimental effect on the thermal conductivity of H13 tool steel. Our investigation focused on the beneficial effect of heat treatment, specifically annealing at different temperatures, on the thermal conductivity of AM-produced H13 parts.
Ključne besede: SLM, thermal conductivity, tool steel, heat treatment
Objavljeno v DiRROS: 28.02.2024; Ogledov: 112; Prenosov: 64
Celotno besedilo (655,96 KB)
Gradivo ima več datotek! Več... |
5. Dispersoids in Al-Mg-Si alloy AA 6086 modified by Sc and YFranc Zupanič, Sandi Žist, Mihaela Albu, Ilse Letofsky-Papst, Jaka Burja, Maja Vončina, Tonica Bončina, 2023, izvirni znanstveni članek Ključne besede: aluminium alloy, heat treatment, microstructure, dispersoids, dilatometry, DSC, hardness
Objavljeno v DiRROS: 02.02.2024; Ogledov: 138; Prenosov: 74
Celotno besedilo (11,03 MB)
Gradivo ima več datotek! Več... |
6. Mechanical properties of high carbon low-density steelsJiri Hajek, Zbyšek Nový, Ludmila Kucerova, Hana Jirková, Črtomir Donik, Zdeňek Jansa, 2023, izvirni znanstveni članek Ključne besede: low density steels, heat treatment, tensile test
Objavljeno v DiRROS: 02.02.2024; Ogledov: 133; Prenosov: 70
Celotno besedilo (10,85 MB)
Gradivo ima več datotek! Več... |
7. The corrosion resistance of dental Ti6Al4V with differing microstructures in oral environmentsMirjam Bajt Leban, Tadeja Kosec, Matjaž Finšgar, 2023, izvirni znanstveni članek Povzetek: The impact of the microstructural properties of a Ti6Al4V alloy on its electrochemical properties, as well as the effect of the α- and β-phases present within it, is still unclear. With the introduction of new, emerging technologies, such as selective laser melting and post heat treatments, the effect of the microstructure on an alloy's corrosion properties has become increasingly interesting from a scientific perspective. When these alloys are produced through different methods, despite an identical chemical composition they have diverse microstructures, and consequently display varying resistance to corrosion. In the present research study, Ti–6Al–4V alloy specimens produced by three different processes, leading to the formation of three different microstructures were investigated: heat treated specimen fabricated by selective laser melting, wrought and cast specimens. The impact of the microstructure of these alloys when immersed in artificial saliva was studied through the use of various electrochemical techniques, by microscopical examinations, and time-of-flight secondary ion mass spectrometry. Corrosion properties were investigated by the measurement of open circuit potential, linear polarization, and potentiodynamic curve measurements followed by microscopical examinations, and time-of-flight secondary ion mass spectrometry examination was conducted to reveal spatial distribution of alloying species on oxide film. It was found that the difference between specimens containing an α+β microstructure was small and not dependent on the aspect ratio of the β-phase, alloy grain size, and vanadium partitioning coefficient, but rather on the size, shape, and content of this phase.
Ključne besede: Ti6Al4V, dental alloy, microstructure, corrosion resistance, heat treatment, ToF-SIMS
Objavljeno v DiRROS: 26.10.2023; Ogledov: 435; Prenosov: 220
Celotno besedilo (8,12 MB)
Gradivo ima več datotek! Več... |
8. Effect of heat treatment on the microstructure and performance of high-velocity air-fuel sprayed WC-10Co4Cr coatingsXuedong Zhou, Haijun Liu, Jishi Zhang, Jinsheng Ji, Wensheng Zhao, Zhimin Zhang, Qiang Wang, Yong Xue, 2021, izvirni znanstveni članek Ključne besede: heat treatment, WC-10Co4Cr coatings, abrasion resistance, corrosion resistance
Objavljeno v DiRROS: 06.05.2022; Ogledov: 446; Prenosov: 129
Povezava na datoteko |
