21. Heavy minerals as indicators of source material in soils on carbonatesBarbara Čeplak, Miloš Miler, Nina Zupančič, Simona Jarc, 2023, izvirni znanstveni članek Povzetek: The origin of the soils formed on carbonate rocks remains uncertain, as they are probably of polygenetic origin. Of particular interest are the elevated contents of some trace elements detected in these soils, as they can hardly be attributed to insoluble residues of carbonate rock. The aim of this study was to uncover the relationship between heavy minerals in bedrock and soil and to identify other sources that influence the mineral and chemical composition of soil. We investigated representative samples of soils and dolomite bedrock as well as sandstones and marlstones from the nearby flysch basin as an expected source of the aeolian contribution. XRD and SEM/EDS showed that mineral diversity is higher in soils compared to the dolomites. Heavy minerals found in dolomite insoluble residue include sphalerite, Ti-oxide (probably rutile), zircon, fluorite, pyrite, minerals of REE phosphates and apatite group, interpreted as terrigenous detrital material. The mineral composition of soil heavy fraction is only partly following insoluble residues of bedrock and indicates possible aeolian contribution. Comparison with nearby flysch sandstones and marlstones showed similarities in mineralogical diversity by the presence of chromite and Fe-Cr(Mn) oxides (probably carmichaelite). Other minerals present in soils and flysch layers, such as Ti-oxide (probably rutile), zircon, REE phosphates, and pyrite grains, however, show similarities in mode of occurrence and transport indications. Signs of aeolian transport on the grains detected in soils were further confirmed by SEM/EDS.
Ključne besede: Phaeozem, Upper Triassic dolomite, flysch layers, trace elements, SEM/EDS
Objavljeno v DiRROS: 04.01.2024; Ogledov: 203; Prenosov: 44
 Celotno besedilo (8,60 MB) |
22. |
23. |
24. |
25. Rak jajčnikov : ponovno nekaj novega2023, zbornik recenziranih znanstvenih prispevkov na domači konferenci Povzetek: Rak jajčnikov je najpogostejši vzrok smrti pri ženskah, ki zbolijo za ginekološkimi raki, saj je bolezen za večino bolnic v napredovalih fazah pogosto usodna. To je posledica težavne prepoznavnosti bolezni v zgodnjih fazah, ko je zdravljenje učinkovito. /// Na žalost preventivni program za zgodnje odkrivanje raka jajčnikov še ne obstaja, zato je pri več kot 75 % bolnic bolezen odkrita v napredovalih stadijih, kar posledično prinaša slabo prognozo. Tako pri zdravnikih kot pri ženskah je pomanjkljivo poznavanje zgodnjih znakov bolezni, kar lahko vodi v napačno diagnostiko in triažiranje bolnic v neprimerno zdravstveno ustanovo. /// Diagnoza se postavi s pomočjo ustreznih diagnostičnih preiskav, potrdi pa se s patohistološko preiskavo. 90 % rakov jajčnikov izvira iz epitelija, medtem ko so drugi tipi redki. Osnovno zdravljenje vključuje kirurški poseg, katerega cilj je popolnoma odstraniti bolezen in doseči stanje brez vidnega ostanka bolezni. Sledi sistemska terapija, medtem ko obsevanje pri zdravljenju raka jajčnikov nima ključnega pomena. /// Ugotovljeno je, da je zdravljenje raka jajčnikov najuspešnejše v specializiranih ustanovah, kjer delujejo strokovnjaki z usmerjenostjo v ginekološko-onkološko področje. V Sloveniji si nenehno prizadevamo za standardizirano in kakovostno obravnavo žensk z rakom jajčnikov.
Ključne besede: ginekološki raki, elektronske knjige
Objavljeno v DiRROS: 22.11.2023; Ogledov: 291; Prenosov: 136
Celotno besedilo (1,10 MB)
Gradivo ima več datotek! Več... |
26. The corrosion properties of steel in pore solutions obtained from alkali‐activated mortarsNina Gartner, Tadeja Kosec, Stéphane Poyet, Andraž Legat, 2023, izvirni znanstveni članek Povzetek: Alkali‐activated materials (AAMs) are considered a promising alternative to materials made from ordinary Portland cement (OPC). Other than considering the durability of the material itself, the use of AAMs for reinforced concrete elements also raises the question of steel corrosion processes in these materials, which are still relatively unknown. Three different alkali‐activated mortars were prepared for this study, based on either fly ash, slag, or metakaolin. Pore solutions were then extracted from each mortar and chemically analyzed. Electrochemical techniques were used to study the corrosion of steel in synthetic pore solutions containing varying concentrations of chlorides. In parallel, the same corrosion tests were performed in a generic pore solution representing OPC mortar. It was shown that the chemical composition differed in each pore solution tested, thus affecting the corrosion properties of the steel. The addition of chloride also had a varying effect on the corrosion properties of the steel in each type of pore solution tested. This study provided a basic overview of the corrosion behavior and mechanisms of the various AAM environments in comparison to that of OPC.
Ključne besede: alkali-aktivated materials, corrosion, electrochemical corrosion techniques, extracted pore solution
Objavljeno v DiRROS: 20.11.2023; Ogledov: 235; Prenosov: 34
Celotno besedilo (2,73 MB)
Gradivo ima več datotek! Več... |
27. Monitoring the galvanic corrosion of copper–steel coupling in bentonite slurry during the early oxic phase using coupled multielectrode arraysTadeja Kosec, Miha Hren, Klara Prijatelj, Bojan Zajec, Nina Gartner, Andraž Legat, 2023, izvirni znanstveni članek Povzetek: In the case of a two-part container for spent nuclear fuel, consisting of an iron-based inner structure with a copper coating, the potential perforation of copper through minor damage may result in intensive galvanic corrosion between copper and steel. The present work focuses on the corrosion of steel galvanically coupled to copper and exposed to a slightly saline environment under oxic conditions. The electrochemical processes on individual electrodes were monitored by coupled multielectrode arrays (CMEAs). The CMEAs were either in contact with groundwater saturated with bentonite or immersed in groundwater only. Very high galvanic corrosion currents were detected between carbon steel and pure copper in the early oxic phase. Additionally, the use of CMEAs further made it possible to monitor the distribution of cathodic currents around the steel electrode, which behaved anodically. Various microscopy and spectroscopy techniques were applied to identify the modes of corrosion and the type of corrosion products present at the end of the period of exposure.
Ključne besede: copper, steel, bentonite, Aspö groundwater, coupled multi electrode array, electrochemical properties, Raman analysis, corrosion
Objavljeno v DiRROS: 16.11.2023; Ogledov: 300; Prenosov: 38
Celotno besedilo (1,66 MB)
Gradivo ima več datotek! Več... |
28. Izgradnja lizimetrov za preučevanje izpiranja potencionalno nevarnih snovi iz gradbenih proizvodovJanez Turk, Janko Urbanc, Ana Mladenovič, Alenka Sešek Pavlin, Primož Oprčkal, Karmen Fifer Bizjak, Barbara Likar, Marko Brodnik, Nina Mali, 2020, izvirni znanstveni članek Povzetek: Z uporabo recikliranih odpadkov v gradbeništvu nadomeščamo naravne materiale in s tem vzpostavljamo krožno gospodarstvo na lokalnem nivoju. Pomemben vidik je tudi ohranjanje naravnih virov. To je še posebno pereče pri zemeljskih delih (npr. zasipih in nasipih), kjer prihaja do velike porabe materialov. Geotehnični kompoziti iz recikliranih materialov, v primerjavi z naravnimi agregati ali zemljinami, lahko vsebujejo višje celotne koncentracije potencialno nevarnih snovi (težke kovine, klorid, sulfat, fluorid, organska onesnaževala itd.). Pogoj za uporabo takšnih kompozitov je, da so v njih potencialno nevarne snovi imobilizirane in da so zato iz kemijskega vidika trajno inertni. Možni vplivi na okolje, predvsem prenos različnih potencialno nevarnih snovi iz kompozitov v tla oziroma vodonosnik, so običajno ovrednoteni na laboratorijski ravni, medtem ko je njihovo obnašanje v dejanskem okolju slabo proučeno. Zato se pojavljajo zahteve po razvoju občutljivih, zanesljivih in cenovno ter časovno učinkovitih orodij za določitev masnih tokov potencialno nevarnih snovi iz gradbenih proizvodov, na primer geotehničnih kompozitov, pod vplivi različnih okoljskih dejavnikov. V članku predstavljamo postopek vzpostavitve terenskega laboratorija na osnovi sistema "pan" lizimetrov, za zbiranje izcednih voda iz zasipov, ki so bili izdelani iz geotehničnih kompozitov iz recikliranih materialov. Lizimetre smo konstruirali in izvedli tako, da je njihova izgradnja cenovno ugodna, hkrati pa so po svojih dimenzijah dovolj veliki, da reprezentativno odražajo procese v zgrajenih geotehničnih zasipih. Pridobljeni podatki o količini in parametrih izcedne vode bodo služili kot osnova za določanje vodne bilance in za študij imobilizacije potencialno nevarnih snovi v kompozitih. Hkrati bodo uporabljeni kot vhodni podatki za geokemijski numerični model, s katerim bomo simulirali transport potencialno nevarnih snovi, sproščenih iz preučevanih kompozitov, v različnih tipih vodonosnikov (npr. medzrnski in razpoklinski).
Ključne besede: lizimeter, izlužek, okoljski monitoring, geotehnični zasip, odpadki
Objavljeno v DiRROS: 12.09.2023; Ogledov: 265; Prenosov: 122
Celotno besedilo (2,46 MB)
Gradivo ima več datotek! Več... |
29. Remediation of contaminated soil by red mud and paper ashPrimož Oprčkal, Ana Mladenovič, Nina Zupančič, Janez Ščančar, Radmila Milačič, Vesna Zalar Serjun, 2020, izvirni znanstveni članek Povzetek: Remediation of contaminated soil can be performed by using various techniques, which must be adequately tailored for each specific case. The aim of this research is to critically evaluate the potential use of red mud and paper ash and a combination of the two as immobilization additives for the remediation of contaminated soil from one of the most polluted sites in Slovenia. The proposed procedure involves the preparation of geotechnical composites made from contaminated soil and mixed with 25 wt% of immobilization additives and an optimal quantity of water to achieve consistency, at which maximum compaction according to the Proctor Compaction Test procedure can be achieved. The results reveal a positive, time-dependent trend for the immobilization of potentially toxic elements in the composite with paper ash, because of the formation of the new hydration products with potentially toxic elements. In a composite containing only red mud, potentially toxic elements were immobilized by sorption mechanisms with no general time-dependent trends. The composite with a combination of additives demonstrates the remediation characteristics of both red mud and paper ash. Using this approach excavated contaminated soil, red mud and paper ash can be successfully recycled in the proposed composites, which can be beneficially used in situ for rehabilitation of contaminated sites. Nevertheless, mobilization of some potentially toxic elements at high pHs may represent a limiting factor and has to be taken into the consideration when a combination of red mud and paper ash is used as immobilization additive.
Ključne besede: red mud, paper ash, contaminated soil, potentially toxic elements, geotechnical composites
Objavljeno v DiRROS: 31.08.2023; Ogledov: 284; Prenosov: 223
Celotno besedilo (2,28 MB)
Gradivo ima več datotek! Več... |
30. Monitoring the corrosion of steel in concrete exposed to a marine environmentNina Gartner, Tadeja Kosec, Andraž Legat, 2020, izvirni znanstveni članek Povzetek: Reinforced concrete structures require continuous monitoring and maintenance to prevent corrosion of the carbon steel reinforcement. In this work, concrete columns with carbon and stainless steel reinforcements were exposed to a real marine environment. In order to monitor the corrosion processes, two types of corrosion probes were embedded in these columns at different height levels. The results from the monitoring of the probes were compared to the actual corrosion damage in the different exposure zones. Electrical resistance (ER) probes and coupled multi-electrodes (CMEs) were shown to be promising methods for long-term corrosion monitoring in concrete. Correlations between the different exposure zones and the corrosion processes of the steel in the concrete were found. Macrocell corrosion properties and the distribution of the separated anodic/cathodic places on the steel in chloride-contaminated concrete were addressed as two of the key issues for understanding the corrosion mechanisms in such environments. The specific advantages and limitations of the tested measuring techniques for long-term corrosion monitoring were also indicated. The results of the measurements and the corrosion damage evaluation clearly confirmed that the tested stainless steels (AISI 304 and AISI 304L) in a chloride-contaminated environment behave significantly better than ordinary carbon steel, with corrosion rates from 110% to 9500% lower in the most severe (tidal) exposure conditions.
Ključne besede: corrosion in concrete, steel reinforcement, long-term exposure, field exposure, electrical resistance (ER) probes, coupled multi-electrodes
Objavljeno v DiRROS: 21.08.2023; Ogledov: 232; Prenosov: 149
Celotno besedilo (4,42 MB)
Gradivo ima več datotek! Več... |
