1. Bioresorbability dependence on microstructure of additivelly- manufactured and conventionally-produced Fe-Mn alloysMatjaž Godec, Jakob Kraner, Danijela Anica Skobir Balantič, Irena Paulin, Damjana Drobne, Veno Kononenko, Aleksandra Kocijan, Paul J. McGuiness, Črtomir Donik, 2024, zaključena znanstvena zbirka raziskovalnih podatkov Povzetek: The dataset supports the results shown in the tables and figures in the article entitled “Bioresorbability Dependence on Microstructure of Additivelly-Manufactured and Conventionally-Produced Fe-Mn Alloys” (doi.org/10.1016/j.jmrt.2024.04.097). It contains measurements of corrosion resistance of Fe-Mn samples, phase analysis of samples A, B and C, surface and depth profiling XPS, EDS measurements of a cross-section of Fe-Mn powder particles and viability measurements results.
Ključne besede: Fe-Mn alloy, laser powder bed fusion, bioresorbable, microstructure, corrosion behaviour, biocompatibility
Objavljeno v DiRROS: 12.04.2024; Ogledov: 150; Prenosov: 59
 Celotno besedilo (2,55 MB)
Gradivo ima več datotek! Več... |
2. Effect of post-treated low-temperature plasma nitriding on the wear and corrosion resistance of 316L stainless steel manufactured by laser powder-bed fusionMatjaž Godec, Črtomir Donik, Aleksandra Kocijan, Bojan Podgornik, Danijela Anica Skobir Balantič, 2020, izvirni znanstveni članek Ključne besede: austenitic stainless steel, powder bed fusion, low-temperature plasma nitriding, wear and corrosion behaviour, dislocation cell structure
Objavljeno v DiRROS: 25.03.2024; Ogledov: 94; Prenosov: 61
 Celotno besedilo (3,28 MB)
Gradivo ima več datotek! Več... |
3. Use of plasma nitriding to improve the wear and corrosion resistance of 18Ni-300 maraging steel manufactured by selective laser meltingMatjaž Godec, Bojan Podgornik, Aleksandra Kocijan, Črtomir Donik, Danijela Anica Skobir Balantič, 2021, izvirni znanstveni članek Ključne besede: selective laser melting, 18Ni-300 maraging steel, heat treatment, plasma nitriding, retained and reverted austenite, wear and corrosion behaviour
Objavljeno v DiRROS: 25.03.2024; Ogledov: 103; Prenosov: 56
Celotno besedilo (3,37 MB)
Gradivo ima več datotek! Več... |
4. Evolution of microstructure and embrittlement during the tempering process in SiCrCu medium-carbon steelsPavel Salvetr, Aleksandr Gokhman, Črtomir Donik, Zbyšek Nový, Jakub Kotous, Matjaž Godec, 2023, izvirni znanstveni članek Ključne besede: medium-carbon steel, tempering martensite embrittlement, microstructure, mechanical properties
Objavljeno v DiRROS: 08.03.2024; Ogledov: 95; Prenosov: 61
Celotno besedilo (4,44 MB)
Gradivo ima več datotek! Več... |
5. Characterisation of the microstructure and defects during the direct energy deposition of hybrid Ti6Al4V in a low-quality atmosphereSimon Malej, Črtomir Donik, Matej Balažic, Matija Bizjak, Marko Kač, Matjaž Godec, 2023, izvirni znanstveni članek Ključne besede: direct energy deposition, Ti6Al4V, protective atmosphere
Objavljeno v DiRROS: 08.03.2024; Ogledov: 108; Prenosov: 56
Celotno besedilo (3,66 MB)
Gradivo ima več datotek! Več... |
6. In vitro and in vivo degradation behavior of Mg-0.45Zn-0.45Ca (ZX00) screws for orthopedic applicationsDiana C. Martinez, Anna Dobkowska, Romy Marek, Hanna Ćwieka, Jakub Jaroszewicz, T. Plociński, Črtomir Donik, Heike Helmholz, Bérengère Luthringer-Feyerabend, Berit Zeller-Plumhoff, Regine Willumeit-Römer, Wojciech Święszkowski, 2023, izvirni znanstveni članek Ključne besede: magnesium alloys, biodegradable implants, microstructure, electron microscopy, corrosion layers
Objavljeno v DiRROS: 08.03.2024; Ogledov: 96; Prenosov: 94
Celotno besedilo (23,65 MB)
Gradivo ima več datotek! Več... |
7. Study on dissolution of Ba-containing inoculant in ductile cast iron melt and nucleation of graphiteMarica Tonkovič-Prijanovič, Primož Mrvar, Jaka Burja, Črtomir Donik, Mitja Petrič, 2023, izvirni znanstveni članek Ključne besede: inoculant, inoculant dissolving, reaction zone, phase composition, graphite nucleation, ductile cast iron, barium inoculant
Objavljeno v DiRROS: 07.02.2024; Ogledov: 134; Prenosov: 62
Celotno besedilo (17,37 MB)
Gradivo ima več datotek! Več... |
8. Insights into microstructural evolution of tungsten-tungsten carbide plasma facing composite materials prepared by field assisted sintering techniqueAljaž Iveković, Matej Kocen, Petra Jenuš, Anže Abram, Črtomir Donik, Saša Novak, 2023, izvirni znanstveni članek Ključne besede: tungsten, tungsten carbide, interface, microstructure, fusion energy
Objavljeno v DiRROS: 07.02.2024; Ogledov: 133; Prenosov: 76
Celotno besedilo (14,95 MB)
Gradivo ima več datotek! Več... |
9. Possibilities for improvement of mechanical properties of high-strength medium-carbon SiCr steelsPavel Salvetr, Jakub Kotous, Črtomir Donik, Aleksandr Gokhman, Zbyšek Nový, 2023, izvirni znanstveni članek Ključne besede: spring steel, 54SiCr6 steel, microstructure, mechanical properties
Objavljeno v DiRROS: 02.02.2024; Ogledov: 212; Prenosov: 71
Celotno besedilo (1,44 MB)
Gradivo ima več datotek! Več... |
10. Hybrid additive manufacturing of Ti6Al4V with powder-bed fusion and direct-energy depositionSimon Malej, Matjaž Godec, Črtomir Donik, Matej Balažic, René Zettler, Thomas Lienert, Laurent Pambaguian, 2023, izvirni znanstveni članek Ključne besede: hybrid additive manufacturing, Ti6Al4V, tensile properties, defects, microstructure, phase transformation
Objavljeno v DiRROS: 02.02.2024; Ogledov: 154; Prenosov: 80
Celotno besedilo (18,54 MB)
Gradivo ima več datotek! Več... |
