Digital repository of Slovenian research organisations

Search the repository
A+ | A- | Help | SLO | ENG

Query: search in
search in
search in
search in

Options:
  Reset


Query: "keywords" (wood mineralization) .

1 - 2 / 2
First pagePrevious page1Next pageLast page
1.
Environmental and economic impacts of hydroxyapatite mineralized wood : LCA and LCC analysis
Matic Sitar, Manja Kitek Kuzman, Leon Oblak, Katarina Remic, 2024, original scientific article

Abstract: Wood is considered a promising raw material for the circular bioeconomy and has the ability to store biogenic carbon, and this is one reason why we want to extend the service life of the wood. In order to consider the influence of durability in our study, we used two wood species with different lifespans. Beech (Fagus sylvatica L.) belongs to the group of very sensitive wood species, as the durability of the untreated wood is estimated to be around 5 years; meanwhile, pine (Pinus sylvestris L.) belongs to the group of moderately resistant wood species, where the durability of the untreated wood is estimated to be up to 15 years. While toxic chemicals are often used for wood preservation, hydroxyapatite offers an environmentally friendly solution for wood mineralization. This study presents life cycle assessment (LCA) and life cycle cost (LCC) analyses comparing a novel hydroxyapatite (HAp) mineralization method with a service life of 50 years to a non-mineralized reference alternative. LCA was based on EN ISO 14040 and EN ISO 14044, while LCC was adapted from the European Commission’s LCC tool for public procurement. The results of the LCA show that mineralized wood has a lower overall impact on the environment than surface-treated beech wood but a higher impact than surface-treated pine wood. Most impact categories were determined by electricity consumption with the exception of stratospheric ozone depletion, water consumption, and land use. Water consumption proved to be the category where the mineralization process was problematic due to water consumption during the leaching process. The LCC showed that mineralized wood is the most cost-effective solution for the exterior façade, as all costs, but especially investment costs, were lower. The differences in the LCA and LCC results are mainly due to the different lifetimes of the two alternatives. It can be concluded that if energy-intensive processes and chemicals are used in the production of the material, the extended lifetime must be sufficient to account for the additional impacts that occur during the production phase.
Keywords: environmental impacts, hydroxyapatite, life cycle assessment (LCA), life cycle cost analysis (LCC), wood mineralization
Published in DiRROS: 09.09.2024; Views: 384; Downloads: 2646
.pdf Full text (2,60 MB)
This document has many files! More...

2.
Combining mineralisation and thermal modification to improve the fungal durability of selected wood species
Rožle Repič, Andreja Pondelak, Davor Kržišnik, Miha Humar, Andrijana Sever Škapin, 2022, original scientific article

Abstract: The development of non-biocidal and environmentally friendly systems to protect wood against biological decay has become a high priority in recent years. In the present study the impact of an innovative modification procedure, combining two environmentally friendly modification methods: thermal modification and mineralisation, using an aqueous solution of calcium acetoacetate as a precursor, on the fungal durability of wood was evaluated. European beechwood (Fagus sylvatica) and Norway sprucewood (Picea abies) were selected as model wood species. Wood samples were treated using either a single or combination of both methods and exposed to four different fungi: Gloeophyllum trabeum, Rhodonia placenta, Trametes versicolor and Pleurotus ostreatus. The effect of the different modifications on moisture content, dynamic vapour sorption, contact angle and pH value was also evaluated. Overall, the highest durability against Rhodonia placenta, Trametes versicolor and Pleurotus ostreatus was achieved through thermal modification in both wood species, while the combination of mineralisation and thermal modification has a synergistic effect against degradation by Gloeophyllum trabeum. In the case of beechwood the mass loss decreased from 41% for native to 6% for combined modified samples. We proved that the effectiveness of different treatment against fungal decay of wood were in strong dependence of their moisture content, dynamic vapour sorption, contact angle and pH values. The role of fungi on the morphology of the wood and on crystal structure of formed carbonate was investigated using SEM-EDS analysis.
Keywords: thermal modification, wood mineralization, fungal durability, environmentally friendly modification methods
Published in DiRROS: 20.06.2023; Views: 907; Downloads: 790
.pdf Full text (3,55 MB)
This document has many files! More...

Search done in 0.05 sec.
Back to top