1. Effects of the temperature on the pore evolution during sintering of the belite-sulfoaluminate cement clinker using x-ray computed microtomographySabina Dolenec, Lidija Korat, Maruša Mrak, Andrej Ipavec, Lea Žibret, 2020, original scientific article Abstract: In this paper, the effects of the sintering temperature on the pore evolution of the belite-sulfoaluminate cement clinker were evaluated. Belite-sulfoaluminate cement clinker with a targeted composition of 65 w/% b-belite, 20 w/% calcium sulfoaluminate and 10 w/% ferrite was sintered at three different temperatures: 1200 °C, 1250 °C and 1300 °C. To quantitatively evaluate the pore evolution during sintering, a 3D microstructure reconstruction by micro-CT was used. From the data, the pore volume frac- tion and pore number were extracted and compared, and the pore size distribution with the sintering temperature was obtained as well. Additionally, the pore shape and distribution were displayed in 3D based on actual microstructure data. Clinker samples were also characterized by Hg-intrusion porosimetry and gas sorption. The changes in the pore evolution occurred to a larger extent when sintering at 1300 °C. Apart from a significant porosity decrease, pore coarsening was evident at this temperature, reducing their connectivity and shrinkage of the clinker. Simultaneously, the bulk and apparent densities increased with the temperature due to densification, while the BET surface area of the studied clinkers decreased, indicating the rounding of pores and particle coalescence with an increasing grain growth.
Keywords: klinker, belit-sulfoaluminat, razvoj por, sintranje
Published in DiRROS: 04.08.2023; Views: 310; Downloads: 132
 Full text (2,27 MB)
This document has many files! More... |
2. The valorisation of selected quarry and mine waste for sustainable cement production within the concept of circular economyEmilija Fidanchevski, Katarina Šter, Maruša Mrak, Ljiljana Kljajević, Gorazd Žibret, Klemen Teran, Bojan Poletanovic, Monika Fidanchevska, Sabina Dolenec, Ildikó Merta, 2022, original scientific article Abstract: The cement industry could potentially consume large amounts of solid industrial waste in order to improve its sustainability. The suitability of selected quarry and mine waste as secondary raw materials (SRM) was examined for the sustainable production of cement following the concept of a circular economy. The chemical, mineralogical, and radiological characterization of SRM was conducted in this study. Its potential use in low-carbon and low-energy belite-sulfoaluminate cement was investigated by incorporating the examined SRM into cement clinker. Various characterization methods were used to characterize the cement, including X-ray powder diffraction (XRD), thermal analysis (DTA/TG), and isothermal calorimetry. Depending on the chemical composition of the waste, lower or higher amounts were allowed to be incorporated into the raw clinker mixture for a targeted clinker phase composition. Among the samples, differences were observed in the phase composition of synthesized clinkers, which slightly influenced the reactivity of the cement but did not significantly change the compressive strength of the final product.
Keywords: mineralne surovine, rudarski odpadki, rudniki, kamnolomi, cement, klinker, krožno gospodarstvo, BCSA clinker, cement, circular economy, clinker, mine wastes, quarry waste
Published in DiRROS: 10.06.2022; Views: 590; Downloads: 309
Full text (3,34 MB)
This document has many files! More... |
