Digital repository of Slovenian research organisations

Search the repository
A+ | A- | Help | SLO | ENG

Query: search in
search in
search in
search in

Options:
  Reset


Query: "keywords" (flax) .

1 - 3 / 3
First pagePrevious page1Next pageLast page
1.
Preliminary assessment of alkali-resistant flax based meshes for reinforcing cementitious composites
Jaka Gašper Pečnik, Laetitia Sarah Jennifer Marrot, Marica Mikuljan, Tania Langella, Matthew Schwarzkopf, 2025, original scientific article

Abstract: The production of textile-reinforced concrete (TRC) requires less materials and energy in comparison with conventional concrete reinforced with steel rebars, which draws some solutions towards the production of net zero concrete that the Cement and Concrete Industry sector should reach by 2050. To go one step further, this study investigates the development of flax based meshes as basic components for a reinforcement grid in cementitious materials. Flax strands and hybrid strands (combination of flax strands and glass or basalt rovings) were impregnated with an epoxy resin to form meshes. The physical and mechanical properties of the flax based meshes were assessed and the alkaline resistance of these reinforcing materials was evaluated to determine their durability in a cementitious matrix. At isoweight of reinforcement, the flax-based meshes demonstrated the best performance in terms of specific modulus and specific strength compared to the hybrid meshes. The hybrid meshes from the control batch displayed specific properties in the same range, whether they were constituted of AR-glass or basalt. However, the use of alkali-resistant glass rovings strongly mitigated the degradation of the mechanical properties of the hybrids meshes by making them less affected by the alkaline environment, among all the reinforcement meshes. In contrast, hybrid meshes with basalt experienced an extensive reduction in tensile strength and strain after exposure to alkaline environment, due to the corrosion of the basalt fibres. Pull-out tests revealed maximum bond strengths for the flax based meshes embedded in a high-performance concrete matrix.
Keywords: alkali, cement, flax, reinforcement
Published in DiRROS: 27.08.2025; Views: 553; Downloads: 283
.pdf Full text (4,01 MB)
This document has many files! More...

2.
Impact of metakaolin on mechanical performance of flax textile-reinforced cement-based composites
Filip Majstorović, Václav Sebera, Maruša Mrak, Sabina Dolenec, Marco Wolf, Laetitia Sarah Jennifer Marrot, 2022, original scientific article

Abstract: This study presents research on the effect of Portland cement (PC) replacement with metakaolin on the mechanical behavior of flax textile-reinforced cementitious matrices (TRCM). The composition of cementitious matrices and in-situ flax fibres was determined using X-ray diffraction and thermogravimetric analysis, while the reinforcement efficiency of the textile and mechanical behavior of TRCMs was investigated by three-point bending tests and finite element analysis. High amounts of PC replacement with metakaolin provided a calcium hydroxide-free environment, more suitable for the natural fibres, to avoid their degradation and embrittlement and, thus, significantly contribute to the ductility of the cement-based composite material.
Keywords: textile-reinforced concrete (TRC), flax textile, natural fibres, finite element, metakaolin, cement-based composites, open access
Published in DiRROS: 22.05.2023; Views: 1575; Downloads: 816
.pdf Full text (8,40 MB)
This document has many files! More...

3.
Search done in 0.06 sec.
Back to top