Digital repository of Slovenian research organisations

Search the repository
A+ | A- | Help | SLO | ENG

Query: search in
search in
search in
search in

Options:
  Reset


Query: "author" (Lea Ho%C5%A1njak) .

1 - 10 / 30
First pagePrevious page123Next pageLast page
1.
Evaluation of clinical interventions made by pharmacists in chemotherapy preparation
Lea Knez, Raisa Laaksonen, Catherine Duggan, 2010, original scientific article

Abstract: Background. Cancer drugs are high risk drugs and medication errors in their prescribing, preparation and administration have serious consequences, including death. The importance of a multidisciplinary approach and the benefits of pharmacistsć contribution to cancer treatment to minimise risk have been established. However, the impact of services provided by pharmaciststo cancer patient care is poorly studied. This study explored the clinical interventions made by pharmacists in dispensing of chemotherapy doses, and evaluated pharmacistsć contribution to patient care. Methods. Pharmacists at the Chemotherapy Preparation Unit at a tertiary cancer centre in London were shadowed by two research pharmacists during the clinical screening of chemotherapy prescriptions and release of prepared drugs. An expert panel of pharmacy staff rated the clinical significance of the recordedinterventions. Results. Twenty-one pharmacistsć interventions were recorded during the screening or releasing of 130 prescriptions or drugs. ĆDrug and therapyĆ (38%), ĆclericalĆ (22%) and Ćdose, frequency and durationĆ (19%) related problems most often required an intervention, identifying areas in chemotherapy prescribing that need improvement. The proposed recommendations were implemented in 86% of the cases. Many recorded interventions (48%) were ranked to have had a Ćvery significantĆ influence on patient care. Conclusion. Clinical interventions made by pharmacists had a significant impact on patient care. The integration of pharmacistsć technical and clinical roles into dispensing of chemotherapy doses is required for providing high-quality cancer services.
Published in DiRROS: 18.03.2024; Views: 2; Downloads: 1
.pdf Full text (452,60 KB)

2.
Manual for use of Al-containing residues in low-carbon mineral binders
Sabina Dolenec, Katja Malovrh Rebec, Anja Lešek, Katarina Šter, Lea Žibret, Gorazd Žibret, Klemen Teran, Emil Pučko, Ildikó Merta, Bojan Poletanovic, Elena Yaneva, Peter Kesserű, Ildikó Kovács, Bence Kószó, Alexandra Németh, Richard Laucournet, Mustafa Hadžalić, Emilija Fidanchevski, Biljana Angjusheva, Vojo Jovanov, Miloš Nenadović, Snežana B. Nenadović, Ivana Vukanac, Liljana Kraljević, Mojca Loncnar, Andrej Ipavec, 2020, dictionary, encyclopaedia, lexicon, manual, atlas, map

Abstract: Današnje družbe si ni več mogoče predstavljati brez sodobne infrastrukture, ki temelji na uporabi različnih materialov ter zahteva veliko porabo energije. Vzporedno s proizvodnjo materialov, nastajajo ogromne količine različnih industrijskih in rudarskih ostankov (odpadki/stranski proizvodi), ki jih trenutno ne izkoriščamo, sama odlagališča pa so premalo raziskana. Cilj Evropske unije (EU) je povečati učinkovito rabo virov in ponudbo sekundarnih surovin z recikliranjem, popisom odpadkov iz rudarskih in drugih industrijskih dejavnosti ter njihova ponovna uporaba. Veliko industrijskih in rudarskih odpadkov je obogatenih z aluminijem (Al), zato lahko nadomeščajo naravne vire Al v mineralnih veznih, vendar njihova uporaba zahteva obsežno poznavanje njihovih kemijskih, mineraloških, radioloških in fizikalnih lastnosti. Priročnik, ki so ga pripravili partnerji projekta RIS-ALiCE obravnava zakonodajne vidike, ki urejajo uporabo sekundarnih surovin v gradbenih proizvodih, opis najpogostejših industrijskih in rudarskih ostankov, ki vsebujejo Al (nahajališča boksitov, rdeče blato, jeklarske žlindre, pepeli iz različnih industrij, itd.), potencial njihove ponovne uporabe in njihov ekonomski vidik, potencialne zahteve/ovire za uporabo sekundarnih surovin v cementni industriji in opis belitno-sulfoaluminatnih cementov, ki so obetavna rešitev za izvajanje krožnega gospodarstva z uporabo velikih količin odloženih industrijskih in rudarskih odpadkov, bogatih z Al.
Keywords: gradbeni proizvodi, ponovna uporaba, ekonomski vidik, industrija cementa, krožno gospodarstvo, industrijski odpadki, zakonodaja, elektronske knjige
Published in DiRROS: 22.01.2024; Views: 139; Downloads: 64
.pdf Full text (4,51 MB)
This document has many files! More...

3.
Use of steel slag for the synthesis of belite-sulfoaluminate clinker
Lea Žibret, Martina Cvetković, Maruša Mrak, Mojca Loncnar, Andrej Ipavec, Sabina Dolenec, 2020, published scientific conference contribution

Abstract: Belite-sulfoaluminate (BCSA) cements are low-carbon mineral binders, which require low energy consumption and allow the incorporation of various secondary raw materials in the clinker raw meal. In this study two types of unprocessed steel slags, coming from stainless steel production, were incorporated in the BCSA clinkers. The clinker phase composition, clinker reactivity, and the compressive strength of the cement were studied to evaluate the possible use of the slag in BCSA clinkers. The cement clinkers were synthesized by using natural raw materials, white titanogypsum, mill scale, as well as two different steel slags: (i) EAF S slag, which is a by-product of melting the recycled steel scrap in an electric arc furnace, and (ii) la dle slag as a by-product of the processes of secondary metallurgy, in various quantities. Raw mixtures with two different targeted phase compositions varying in belite, calcium sulfoaluminate and ferrite phases were sintered at 1250 °C. Clinker phases were determined by Rietveld quantitative phase analysis, while their distribution, morphology and incorporation of foreign ions in the phases were studied by SEM/EDS analysis. The clinker reactivity was determined by isothermal calorimetry. BCSA cements were prepared by adding titanogypsum. The compressive strength of the cement pastes was determined after 7 days of hydration. The presence of a predicted major clinker phases was confirmed by Rietveld analysis, however periclase was also detected. Microscopy revealed subhedral grains of belite and euhedral grains of calcium sulfoaluminate phases, while ferrite occurred as an interstitial phase. The results showed differences in the microstructure and reactivity of the clinker and cement, which can be attributed to varying amounts of ettringite due to different slag types
Keywords: belite-sulfoaluminate cement, cement clinker, steel slags, clinker microstructure, cement reactivity
Published in DiRROS: 19.01.2024; Views: 133; Downloads: 66
.pdf Full text (18,89 MB)
This document has many files! More...

4.
Effect of the cooling regime on the mineralogy and reactivity of belite-sulfoaluminate clinkers
Sabina Dolenec, Katarina Šter, Maruša Mrak, Klara Žagar, Andrej Ipavec, Lea Žibret, 2020, original scientific article

Abstract: This study investigated the influence of different cooling regimes on the microstructure and consequent reactivity of belite-sulfoaluminate clinkers. The cement clinkers were synthesized by incorporating secondary raw materials, such as titanogypsum and bottom ash, to the natural raw materials. Clinker phases were determined by Rietveld quantitative phase analysis, while the distribution morphology and the incorporation of substitute ions in the phases were characterized by scanning electron microscopy using energy-dispersive X-ray spectroscopy (SEM/EDS). Clinker reactivity was studied using isothermal calorimetry and was additionally investigated through compressive strength, which was determined for the cement prepared from the synthesized clinkers. X-ray diffraction analysis showed that, as well as the three main phases (belite, calcium sulfoaluminate, and ferrite), the clinkers contained additional minor phases (mayenite, gehlenite, arkanite, periclase, and perovskite), the ratios of which varied according to the cooling regime utilized. Microscopic observations indicated that the cooling regime also influenced the crystal size and morphology of the main phases, which consequently affected clinker reactivity. Furthermore, a smaller amount of substitute elements was incorporated in the main phases when cooling was slowed. Results showed that, in comparison to clinkers cooled at slower rates, air quenched clinkers reacted faster and exhibited a higher compressive strength at 7 days.
Keywords: clinkers, belite, calcium sulfoaluminate, cooling, microstructure, reactivity
Published in DiRROS: 20.12.2023; Views: 119; Downloads: 57
.pdf Full text (4,18 MB)
This document has many files! More...

5.
Use of fly ash and phosphogypsum for the synthesis of belite-sulfoaluminate clinker
Sabina Dolenec, Lea Žibret, Emilija Fidanchevska, V. Jovanov, Biljana Angjusheva, Vilma Ducman, 2019, original scientific article

Abstract: Fly ash and phosphogypsum were used as Naturally Occurring Radioactive Materials (NORM) by-products for the synthesis of belite-sulfoaluminate clinkers. The influence of raw mixture composition and firing temperature was investigated. Clinkers and cements were examined by X-ray powder diffraction and scanning electron microscopy with energy dispersive X-ray spectroscopy. The compressive strength of the cements was determined after 28 days. Clinker phases identified included ye’elimite, ß-phase of belite, ternesite and gehlenite, while the main hydration product of the cement pastes was ettringite. The results showed that belite-sulfoaluminate cements can be fabricated with a compressive strength of 45.9 N/mm2 by firing the raw mixture (70 wt.% marl, 10 wt.% bauxite and 20 wt.% phosphogypsum) at a temperature of 1320°C/1h.
Keywords: clinker, microstructure, fly ash, gypsum, calcium sulphoaluminate
Published in DiRROS: 27.10.2023; Views: 334; Downloads: 127
.pdf Full text (2,01 MB)
This document has many files! More...

6.
7.
Effects of the temperature on the pore evolution during sintering of the belite-sulfoaluminate cement clinker using x-ray computed microtomography
Sabina Dolenec, Lidija Korat, Maruša Mrak, Andrej Ipavec, Lea Žibret, 2020, original scientific article

Abstract: In this paper, the effects of the sintering temperature on the pore evolution of the belite-sulfoaluminate cement clinker were evaluated. Belite-sulfoaluminate cement clinker with a targeted composition of 65 w/% b-belite, 20 w/% calcium sulfoaluminate and 10 w/% ferrite was sintered at three different temperatures: 1200 °C, 1250 °C and 1300 °C. To quantitatively evaluate the pore evolution during sintering, a 3D microstructure reconstruction by micro-CT was used. From the data, the pore volume frac- tion and pore number were extracted and compared, and the pore size distribution with the sintering temperature was obtained as well. Additionally, the pore shape and distribution were displayed in 3D based on actual microstructure data. Clinker samples were also characterized by Hg-intrusion porosimetry and gas sorption. The changes in the pore evolution occurred to a larger extent when sintering at 1300 °C. Apart from a significant porosity decrease, pore coarsening was evident at this temperature, reducing their connectivity and shrinkage of the clinker. Simultaneously, the bulk and apparent densities increased with the temperature due to densification, while the BET surface area of the studied clinkers decreased, indicating the rounding of pores and particle coalescence with an increasing grain growth.
Keywords: klinker, belit-sulfoaluminat, razvoj por, sintranje
Published in DiRROS: 04.08.2023; Views: 283; Downloads: 122
.pdf Full text (2,27 MB)
This document has many files! More...

8.
The Incorporation of steel slag into belite-sulfoaluminate cement clinkers
Lea Žibret, Katarina Šter, Maruša Mrak, Mojca Loncnar, Sabina Dolenec, 2021, original scientific article

Abstract: The potential use of steel slag from treated steel slag in belite-sulfoaluminate cements was investigated in this study. Cement clinkers with two phase compositions were synthesized, allowing the incorporation of different amounts of steel slag. The phase composition and microstructure of cement clinkers at three different sintering temperatures were studied by X-ray powder diffraction and the Rietveld method, as well as scanning electron microscopy with energy dispersive spectrometry. The results showed that the targeted phase composition of clinkers was achieved at a sintering temperature of 1250%C. However, a higher amount of perovskite instead of ferrite was detected in the clinker with a higher content of Ti-bearing bauxite. Apart from the main phases, such asbelite, calcium sulfoaluminate, and ferrite, several minor phases were identified, including mayenite, perovskite, periclase, and alkali sulfates. In both clinker mixtures, a higher content of MgO in the steelslags resulted in the formation of periclase. Furthermore, the hydration kinetics and compressive strength at 7 and 28 days were studied in two cements prepared from clinkers sintered at 1250%C. As evidenced by the results of isothermal calorimetry, the hydration kinetics were also influenced by the minor clinker phases. Cement with a higher content of calcium sulfoaluminate phase developed a higher compressive strength.
Keywords: cements, BCSA, steel slag, secundary row materials, microstructure, clinker phase
Published in DiRROS: 01.08.2023; Views: 220; Downloads: 103
.pdf Full text (5,50 MB)
This document has many files! More...

9.
Neogene block rotation inside the dextral fault zone at the Adriatic-European collision zone: reexamination of existing results
Lea Žibret, Gorazd Žibret, 2023, original scientific article

Abstract: The study focused on the post-Middle-Miocene stress analysis within the dextral strike-slip zone of the Dinaric fault system in the collision zone between the European plate, the Adria microplate and the Pannonian Domain. Block rotations were studied by re-examination of available paleostress data and their spatial distribution. The results are in agreement with the existing block model of the area, indicating CCW rotations within blocks between the main strike-slip faults in which rotation angle increases from W to E. The improved kinematic model, which is proposed in this study, will contribute to the knowledge on the kinematics within the complex collision zones and improve the seismic hazard models.
Keywords: collision zone, NW External Dinarides, Southern Alps, paleostress tensor, strike-slip zone, block rotation
Published in DiRROS: 06.07.2023; Views: 306; Downloads: 135
.pdf Full text (8,47 MB)

10.
Microstructural characteristics of belite–sulfoaluminate cement clinkers with bottom ash
Lea Žibret, Andrej Ipavec, Sabina Dolenec, 2022, original scientific article

Abstract: The incorporation mechanism of impurities derived from raw materials into a belite-sulfoaluminate cement clinker with bottom ash was investigated in two raw mixtures. Alkalis lowered the sintering temperature by 50 °C. Ti stabilized β belite and prevented the formation of γ-belite. Sodalite solid solution showed an incomplete substitution of Si by Al. At a higher Ti content ferrite solid solution trended towards perovskite composition. Although calcium sulfoaluminate only fully developted at 1300 °C, the clinkers sintered at 1200 °C were the most reactive, as the presence of anhydrite at 1200 °C accelerated early hydration. Clinker reactivity decreased with an increase in sintering temperature.
Keywords: BSCA clinker, belite, calcium sulfoaluminate, secondary raw materials, microstructure, reactivity
Published in DiRROS: 03.07.2023; Views: 364; Downloads: 167
.pdf Full text (8,39 MB)
This document has many files! More...

Search done in 0.38 sec.
Back to top