20.500.12556/DiRROS-16944 Glued-in rods in cross laminated timber - numerical simulations and parametric studies Numerical simulations and parametric studies of glued-in rods in cross-laminated timber have been performed. The simulations were based on 3D finite element analysis, using a cohesive surface model for the bond-lines between the laminations and the bond-line along the rod. The parametric studies investigated the influence of the glued-in length, the rod diameter, and the rod-to-grain angle on the load-bearing capacity and stiffness of the connection. The analyses showed that the load-bearing capacity generally increases with the glued-in length and the rod diameter, which agrees well with experiments. For different rod-to-grain angles, different mechanical behaviour was observed, especially considering the failure modes. glued-in rods cross laminated timber (CLT) parametric study nonlinear numerical modelling glued-in length rod diameter rod orientation lepljene palice križno lepljen les (CLT) natezni preizkus sidrna dolžina palice usmerjenost palice glede na vlakna porušni mehanizmi v CLT true false true Scientific & Technical Press Angleški jezik Slovenski jezik © 2019 The Authors. Published by Elsevier Ltd. Neznano 2023-09-13 08:34:57 2023-09-13 09:00:30 2023-09-14 03:36:03 0000-00-00 00:00:00 2019 0 0 str. 431-441 Vol. 212 2019 0000-00-00 Zaloznikova Objavljeno NiDoloceno 0000-00-00 0000-00-00 2019-04-06 624 0950-0618 10.1016/j.conbuildmat.2019.03.331 2446183 https://www.sciencedirect.com/science/article/pii/S0950061819308396?via%3Dihub open access 1 e51d4079-51ee-11ee-8cc8-001a4af901a5 https://dirros.openscience.si/Dokument.php?lang=slv&id=23030 RAZ_Azinovic_Boris_2019.pdf RAZ_Azinovic_Boris_2019.pdf 1 D442E777A25CBA8F5A7F9C151A477C32 6904f3008e8977726cd29ec6847aa143488afa6afb8da803a296ecc7c3e08dad 6d80b1d6-51f2-11ee-8cc8-001a4af901a5 https://dirros.openscience.si/Dokument.php?lang=slv&id=23031 Zavod za gradbeništvo Slovenije 0 0 0