20.500.12556/DiRROS-16810 Corrosion behavior of steel in pore solutions extracted from different blended cements Mortar specimens made from four different types of cement, CEM I, CEM II, CEM III, and CEM IV, were prepared and pore solutions extracted. Three different types of exposure were studied: noncarbonated without chlorides, noncarbonated with chlorides, and carbonated with chlorides. Various electrochemical methods (linear polarization, potentiodynamic polarization measurements) were implemented to characterize the processes of corrosion on steel in these solutions. The type and extent of corrosion products were evaluated by means of various spectroscopic techniques. Specific differences in the type and extent of corrosion damage were determined and compared for each of the extracted pore solutions from the different blended cements. An attempt was made to classify these differences in comparison with the reference cement (CEM I) and in relation to the different types of exposure. corrosion steel in pore water blended cements Raman Spectroscopy korozija jeklo v porni vodi mešani cementi ramanska spektroskopija true false true Wiley VCH Angleški jezik Slovenski jezik © 2020 The Authors. Materials and Corrosion published by Wiley-VCH Verlag GmbH & Co. KGaA Neznano 2023-08-22 08:35:11 2023-08-22 08:45:43 2023-08-23 03:35:10 0000-00-00 00:00:00 2020 0 0 Nasl. z nasl. zaslona; Opis vira z dne 26. 2. 2020; str. 1-8 5 71 2020 0000-00-00 Zaloznikova Objavljeno NiDoloceno 0000-00-00 0000-00-00 2020-02-25 620.1/2 1521-4176 10.1002/maco.202011548 2563431 https://onlinelibrary.wiley.com/doi/full/10.1002/maco.202011548 1 0bc78442-40a5-11ee-8cc8-001a4af901a5 https://dirros.openscience.si/Dokument.php?lang=slv&id=22852 RAZ_Hren_Miha_2020.pdf RAZ_Hren_Miha_2020.pdf 1 7A78578F96E914E36EA0DD7EFA5368B9 ec67d5fca91adf3306ff931485b46d04a8e64d2be6776e584e8e95ba70745041 09c9cb7a-40a6-11ee-8cc8-001a4af901a5 https://dirros.openscience.si/Dokument.php?lang=slv&id=22853 Zavod za gradbeništvo Slovenije 0 0 0