11. Razširjenost dvojnozobega smrekovega lubadarja (Ips duplicatus) v Sloveniji v letu 2023Maarten De Groot, Tine Hauptman, Marija Kolšek, 2023, kratki znanstveni prispevek Povzetek: Članek prikazuje rezultate raziskave razširjenosti vrste Ips duplicatus (Sahlberg, 1836) v Sloveniji v letu 2023. Uporabili smo 14 režastih pasti tipa Theysohn, ki so bile opremljene s feromonom Dupliwit. V raziskavo smo vključili tudi tri križne prestrezne pasti brez feromona, ki so bile postavljene v sklopu drugega projekta in smo v njih odkrili vrsto I. duplicatus. Prisotnost vrste smo potrdili na šestih lokacijah, skupno pa smo ujeli osem osebkov. Predstavljena je razprava o pomenu teh najdb v kontekstu razširjenosti, spremljanja in upravljanja dvojnozobega smrekovega lubadarja.
Ključne besede: gozdovi, varstvo gozdov, monitoring, navadna smreka, Picea abies, podlubniki, invazivna tujerodna vrsta
Objavljeno v DiRROS: 10.01.2024; Ogledov: 175; Prenosov: 75
 Celotno besedilo (575,46 KB)
Gradivo ima več datotek! Več... |
12. Elucidating nucleation stages of transgranular stress corrosion cracking in austenitic stainless steel by in situ electrochemical and optical methodsSarmiento Klapper Helmuth, Bojan Zajec, Andreas Heyn, Andraž Legat, 2019, izvirni znanstveni članek Povzetek: The pitting and environmentally assisted cracking resistance of austenitic stainless steels (SS) is challenged in several industrial applications particularly those involving hot chloride-concentrated streams. Directional drilling used in the oil and gas exploration is one of these applications. Indeed, high strength CrMn-SS commonly used in drilling technology have a high tendency to fail by stress corrosion cracking (SCC) preceded by localized corrosion once subjected to highly chloride-concentrated drilling fluids at elevated temperatures. A comprehensive understanding regarding the mechanisms governing the transition from pitting into SCCis not currently available, though. Therefore, mechanistic aspects such as the effect of loading conditions on pit nucleation and repassivation as well as the synergistic effect between pit stabilization and the nucleation of a stress corrosion crack are of great practical significance. To investigate this an electrochemical-, optical- and mechanical- monitored SCC test was conducted on a CrMn-SS in an alkaline brine at elevated temperature. The transition from metastable to stable pitting and subsequently to SCC in this system was documented in-situ for the first time. Results supported H.S. Isaacs postulates regarding the interpretation of electrochemical signals and demonstrated that loading conditions affect pit nucleation and repassivation leading to a higher susceptibility of the material to pitting, which preceded SCC.
Ključne besede: pitting corrosion, stress corrosion cracking, monitoring, elektrochemical noise, austenitic stainless steel
Objavljeno v DiRROS: 23.11.2023; Ogledov: 191; Prenosov: 161
Celotno besedilo (2,28 MB)
Gradivo ima več datotek! Več... |
13. Stanje slovenskih gozdov : poročilo o rezultatih nacionalne gozdne inventure 2022Mitja Skudnik, Luka Krajnc, Gal Kušar, Anže Martin Pintar, 2023, elaborat, predštudija, študija Ključne besede: monitoring, nacionalna gozdna inventura, odmrla lesna biomasa, temeljnica, površina gozda, lesna zaloga, vzorčne ploskve, poročila
Objavljeno v DiRROS: 21.11.2023; Ogledov: 291; Prenosov: 0 |
14. Using statistical analysis of an acceleration-based bridge weigh-in-motion system for damage detectionEugene J. O'Brien, Muhammad Arslan Khan, Daniel Patrick McCrum, Aleš Žnidarič, 2020, izvirni znanstveni članek Povzetek: This paper develops a novel method of bridge damage detection using statistical analysis of data from an acceleration-based bridge weigh-in-motion (BWIM) system. Bridge dynamic analysis using a vehicle-bridge interaction model is carried out to obtain bridge accelerations, and the BWIM concept is applied to infer the vehicle axle weights. A large volume of traffic data tends to remain consistent (e.g., most frequent gross vehicle weight (GVW) of 3-axle trucks); therefore, the statistical properties of inferred vehicle weights are used to develop a bridge damage detection technique. Global change of bridge stiffness due to a change in the elastic modulus of concrete is used as a proxy of bridge damage. This approach has the advantage of overcoming the variability in acceleration signals due to the wide variety of source excitations/vehicles–data from a large number of different vehicles can be easily combined in the form of inferred vehicle weight. One year of experimental data from a short-span reinforced concrete bridge in Slovenia is used to assess the effectiveness of the new approach. Although the acceleration-based BWIM system is inaccurate for finding vehicle axle-weights, it is found to be effective in detecting damage using statistical analysis. It is shown through simulation as well as by experimental analysis that a significant change in the statistical properties of the inferred BWIM data results from changes in the bridge condition.
Ključne besede: bridge health monitoring, bridge WIM, structural dynamics, damage detection, vehicle-bridge interaction
Objavljeno v DiRROS: 12.09.2023; Ogledov: 260; Prenosov: 134
Celotno besedilo (8,01 MB)
Gradivo ima več datotek! Več... |
15. Using bridge weigh-in-motion systems to monitor single-span bridge influence linesAleš Žnidarič, Jan Kalin, 2020, izvirni znanstveni članek Povzetek: Bridge weigh-in-motion systems use instrumented bridges or culverts to weigh vehicles as they pass over the structures. They also provide data to allow the calculation of several bridge performance indicators. The article starts with the basics of a bridge weigh-in-motion system and briefly describes two key bridge performance indicators, girder distribution factor and dynamic amplification factor, which are also derived from B-WIM measurements. The central part of the article focuses on monitoring of influence lines, the third key parameter that characterises the bridge performance under traffic loads. First, the method of calculating the bending moment influence lines from random heavy traffic is described. A coefficient of rotational stiffness is introduced, which defines the shape of influence lines around the supports as a linear combination of the ideal simply supported and fixed supported influence lines, to allow quantifying the influence line changes. Then the long-term monitoring of influence lines is investigated on four different single-span test bridges. The initial focus is given on the examination of the effect of temperature on the shape of influence lines. Finally, two sets of influence lines are compared on one test bridge, one from before and the other from after replacing the expansion joints and bearings. The work done so far confirms that calculating of influence lines from random vehicles with a B-WIM system is entirely feasible and that differences in their shape can be detected on single-span bridges. What remains to be investigated is the comparison of these differences to the actual damages and under which circumstances the proposed procedure can compete with or better the routine bridge inspection and the conventional monitoring techniques.
Ključne besede: bridge loading, bridge response, temperature dependency, influence line, monitoring
Objavljeno v DiRROS: 12.09.2023; Ogledov: 328; Prenosov: 125
Celotno besedilo (2,38 MB)
Gradivo ima več datotek! Več... |
16. Izgradnja lizimetrov za preučevanje izpiranja potencionalno nevarnih snovi iz gradbenih proizvodovJanez Turk, Janko Urbanc, Ana Mladenovič, Alenka Sešek Pavlin, Primož Oprčkal, Karmen Fifer Bizjak, Barbara Likar, Marko Brodnik, Nina Mali, 2020, izvirni znanstveni članek Povzetek: Z uporabo recikliranih odpadkov v gradbeništvu nadomeščamo naravne materiale in s tem vzpostavljamo krožno gospodarstvo na lokalnem nivoju. Pomemben vidik je tudi ohranjanje naravnih virov. To je še posebno pereče pri zemeljskih delih (npr. zasipih in nasipih), kjer prihaja do velike porabe materialov. Geotehnični kompoziti iz recikliranih materialov, v primerjavi z naravnimi agregati ali zemljinami, lahko vsebujejo višje celotne koncentracije potencialno nevarnih snovi (težke kovine, klorid, sulfat, fluorid, organska onesnaževala itd.). Pogoj za uporabo takšnih kompozitov je, da so v njih potencialno nevarne snovi imobilizirane in da so zato iz kemijskega vidika trajno inertni. Možni vplivi na okolje, predvsem prenos različnih potencialno nevarnih snovi iz kompozitov v tla oziroma vodonosnik, so običajno ovrednoteni na laboratorijski ravni, medtem ko je njihovo obnašanje v dejanskem okolju slabo proučeno. Zato se pojavljajo zahteve po razvoju občutljivih, zanesljivih in cenovno ter časovno učinkovitih orodij za določitev masnih tokov potencialno nevarnih snovi iz gradbenih proizvodov, na primer geotehničnih kompozitov, pod vplivi različnih okoljskih dejavnikov. V članku predstavljamo postopek vzpostavitve terenskega laboratorija na osnovi sistema "pan" lizimetrov, za zbiranje izcednih voda iz zasipov, ki so bili izdelani iz geotehničnih kompozitov iz recikliranih materialov. Lizimetre smo konstruirali in izvedli tako, da je njihova izgradnja cenovno ugodna, hkrati pa so po svojih dimenzijah dovolj veliki, da reprezentativno odražajo procese v zgrajenih geotehničnih zasipih. Pridobljeni podatki o količini in parametrih izcedne vode bodo služili kot osnova za določanje vodne bilance in za študij imobilizacije potencialno nevarnih snovi v kompozitih. Hkrati bodo uporabljeni kot vhodni podatki za geokemijski numerični model, s katerim bomo simulirali transport potencialno nevarnih snovi, sproščenih iz preučevanih kompozitov, v različnih tipih vodonosnikov (npr. medzrnski in razpoklinski).
Ključne besede: lizimeter, izlužek, okoljski monitoring, geotehnični zasip, odpadki
Objavljeno v DiRROS: 12.09.2023; Ogledov: 265; Prenosov: 120
Celotno besedilo (2,46 MB)
Gradivo ima več datotek! Več... |
17. First record of the northern spruce bark beetle, Ips duplicatus (Sahlberg, 1836), in SloveniaAndreja Kavčič, Zina Devetak, Barbara Piškur, Eva Groznik, Maarten De Groot, 2023, izvirni znanstveni članek Povzetek: The northern spruce bark beetle, Ips duplicatus (Sahlberg), has invaded Central Europe in the past century and continues to spread southwards and westwards. It has caused damage in some parts of Europe in recent decades and poses a serious threat to spruce forests across the continent. From 2018 to 2021, we conducted intensive monitoring to determine the status of I. duplicatus in Slovenia. We used different types of traps and pheromone lures that attract I. duplicatus beetles and took bark samples from bark beetle-infested trees. Of the 26 traps used during the four years of monitoring, I. duplicatus was found in 16 traps in the central part of Slovenia in 2020. Adult beetles were caught in traps containing both I. typographus and I. duplicatus lures. The identity of this species was confirmed using morphological keys and molecular methods. One to five I. duplicatus beetles were found per trap, totaling 25 specimens. However, we did not confirm any I. duplicatus in samples taken from trees in 2021. We conclude that I. duplicatus is present in Slovenia, but our results suggest that the species is only present locally and that the population is small.
Ključne besede: biological invasions, forest pests, temperate forests, conifers, damage, forest pest monitoring, confirmation
Objavljeno v DiRROS: 05.09.2023; Ogledov: 335; Prenosov: 157
Celotno besedilo (3,04 MB)
Gradivo ima več datotek! Več... |
18. |
19. Experiences with the National Forest Inventory (NFI) in Slovenia : presented at 3rd Meeting of the Regional Expert Advisory Working Group on Forest from the Western Balkans, 31 January–1 February 2023, in Durrës, AlbaniaMitja Skudnik, Primož Simončič, 2023, prispevek na konferenci brez natisa Ključne besede: national forest inventory, monitoring, developement of forests, national level, Slovenia
Objavljeno v DiRROS: 24.07.2023; Ogledov: 367; Prenosov: 167
Celotno besedilo (6,86 MB) |
20. |
