1. The role of PET-CT in radiotherapy planning of solid tumoursStaša Jelerčič, Mirjana Rajer, 2015, pregledni znanstveni članek Povzetek: PET-CT is becoming more and more important in various aspects of oncology. Until recently it was used mainly as part of diagnostic procedures and for evaluation of treatment results. With development of personalized radiotherapy, volumetric and radiobiological characteristics of individual tumour have become integrated in the multistep radiotherapy (RT) planning process. Standard anatomical imaging used to select and delineate RT target volumes can be enriched by the information on tumour biology gained by PET-CT. In this review we explore the current and possible future role of PET-CT in radiotherapy treatment planning. After general explanation, we assess its role in radiotherapy of those solid tumours for which PET-CT is being used most. Conclusions. In the nearby future PET-CT will be an integral part of the most radiotherapy treatment planning procedures in an every-day clinical practice. Apart from a clear role in radiation planning of lung cancer, with forthcoming clinical trials, we will get more evidence of the optimal use of PET-CT in radiotherapy planning of other solid tumours.
Ključne besede: positron emission therapy, radiotherapy, radiotherapy planning, tumour biology
Objavljeno v DiRROS: 16.04.2024; Ogledov: 46; Prenosov: 9
 Celotno besedilo (1,25 MB) |
2. In situ consideration of resistance of bridge girder according to EC2 with AEMAna Brunčič, Andrej Štrukelj, Maja Kreslin, Andrej Anžlin, Aljoša Šajna, 2023, objavljeni znanstveni prispevek na konferenci Povzetek: The paper presents a case study of a considerably cracked and degraded bridge in Slovenia: with the implementation of in-situ measurements under bending and shear and the use of a non-destructive acoustic emission technique. Despite the existing crack system, the latter was able to detect microstructural changes. These were characterised by low values of average frequency (AF), as well as lower values of the rise time-amplitude ratio (RA), and energy. A correlation between shear capacity and acoustic activity was observed. This promises to expand the use of AE in the process of assessing of the load-bearing capacity of existing concrete structures.
Ključne besede: shear resistance, shear crack, crack width, acoustic emission (AE) parameters, bridge girder, stiffness, elasticity, damage evaluation
Objavljeno v DiRROS: 28.11.2023; Ogledov: 191; Prenosov: 102
Celotno besedilo (1,08 MB)
Gradivo ima več datotek! Več... |
3. Novel ionisation vacuum gauge suitable as a reference standard : influence of primary electron trajectories on the operationN. Bundaleski, C. F. Adame, Matthias Bernien, Claus Illgen, Berthold Jenninger, Karl Jousten, F. Scuderi, R. A. S. Silva, A. Stöltzel, Janez Šetina, O. M. N. D. Teodoro, Tim Verbovšek, Martin Vičar, Martin Wüest, 2022, izvirni znanstveni članek Ključne besede: vacuum gauge, hot cathode, charged particle optics, secondary electron emission
Objavljeno v DiRROS: 06.05.2022; Ogledov: 468; Prenosov: 152
 Povezava na datoteko |
4. Formaldehyde barrier efficiency of melamine impregnated paper and melamine edge-banding tape surfaced particleboard and MDFSergej Medved, Jernej Forštnarič, 2018, izvirni znanstveni članek Povzetek: Particleboard and MDF are the most usable materials for furniture production, where emission of formaldehyde should be as low as possible. In order to improve aesthetic properties of particleboard and MDF they are covered with appropriate surfacing material. In most cases, melamine impregnated paper is used for face layers. But covering faces should be accompanied with covered edges, as due to low density of core layer formaldehyde much more easily emits from edges than from faces. The presented research shows differences in formaldehyde emission rate at unsurfaced and surfaced MDF and particleboard. For face layer, melamine impregnated papers with grammages of 130 g/m2 and 200 g/m2 were used, while for covering edges, melamine edge-banding tape was applied. In the research it was determined that higher barrier effect was achieved when impregnated paper with a grammage of 200 g/m2 was used. When surface was completely covered with impregnated paper and melamine edge-band tape, formaldehyde emission was lowered by between 83 % and 94 %.
Ključne besede: particleboard, MDF, surfacing, melamine impregnated paper, melamine edge band-tape, formaldehyde emission
Objavljeno v DiRROS: 13.11.2018; Ogledov: 4492; Prenosov: 3059
Celotno besedilo (1,18 MB)
Gradivo ima več datotek! Več... |
5. |
