Iskanje po repozitoriju

A+ | A- | | SLO | ENG

Povzetek: Fires can lead to costly building damage as well as loss of lives and injuries. Installed to protect buildings from fire, or to limit the damage from such outbreaks, fire protection measures are a common feature in buildings. However, these features come at a cost. Although quite ubiquitous in buildings, the value of these features to private individuals and to society is not fully understood. To understand their value, a cost benefit analysis detailing the costs and benefits of fire protection measures is needed. Carrying out such an analysis requires methods for computing both the cost of these fire protection measures, and losses from fires (including both direct and indirect losses). This study outlines methodologies for evaluating those costs and losses. An exhaustive collection of available data necessary for estimating both costs and losses is presented. Several limitations in current methodologies and data constraints were identified, with recommendations proposed to address these shortcomings. Relevant sections of a study by the authors that refines fire protection cost estimation at national and sub-national levels are emphasized, including updated building categories, guidance on computing multipliers, and detailed cost calculation methods for installation and maintenance costs. The calculation uses regularly updated U.S. Census Bureau construction data, ensuring timely multiplier updates. The insights and suggestions presented in this study will ultimately refine the process of selecting fire protection strategies that maximize the net benefit of fire protection measures for both private stakeholders and society at large.
Ključne besede: fire protection measures, cost of fire protection, losses from fire, cost benefit analysis, installation costs, maintenance costs
Objavljeno v DiRROS: 18.04.2024; Ogledov: 83; Prenosov: 12
Celotno besedilo (879,08 KB)
Gradivo ima več datotek! Več...

Povzetek: Purpose Intumescent coatings are nowadays a dominant passive system used to protect structural materials in case of fire. Due to their reactive swelling behaviour, intumescent coatings are particularly complex materials to be modelled and predicted, which can be extremely useful especially for performance-based fire safety designs. In addition, many parameters influence their performance, and this challenges the definition and quantification of their material properties. Several approaches and models of various complexities are proposed in the literature, and they are reviewed and analysed in a critical literature review. Design/methodology/approach Analytical, finite-difference and finite-element methods for modelling intumescent coatings are compared, followed by the definition and quantification of the main physical, thermal, and optical properties of intumescent coatings: swelled thickness, thermal conductivity and resistance, density, specific heat capacity, and emissivity/absorptivity. Findings The study highlights the scarce consideration of key influencing factors on the material properties, and the tendency to simplify the problem into effective thermo-physical properties, such as effective thermal conductivity. As a conclusion, the literature review underlines the lack of homogenisation of modelling approaches and material properties, as well as the need for a universal modelling method that can generally simulate the performance of intumescent coatings, combine the large amount of published experimental data, and reliably produce fire-safe performance-based designs. Research limitations/implications Due to their limited applicability, high complexity and little comparability, the presented literature review does not focus on analysing and comparing different multi-component models, constituted of many model-specific input parameters. On the contrary, the presented literature review compares various approaches, models and thermo-physical properties which primarily focusses on solving the heat transfer problem through swelling intumescent systems. Originality/value The presented literature review analyses and discusses the various modelling approaches to describe and predict the behaviour of swelling intumescent coatings as fire protection for structural materials. Due to the vast variety of available commercial products and potential testing conditions, these data are rarely compared and combined to achieve an overall understanding on the response of intumescent coatings as fire protection measure. The study highlights the lack of information and homogenisation of various modelling approaches, and it underlines the research needs about several aspects related to the intumescent coating behaviour modelling, also providing some useful suggestions for future studies.
Ključne besede: intumescent coatings, fire protection, modelling, structural fire engineering, fire safety, performance-based design
Objavljeno v DiRROS: 17.04.2024; Ogledov: 86; Prenosov: 27
Celotno besedilo (790,21 KB)
Gradivo ima več datotek! Več...

Povzetek: This research study concerns an experimental, budget-friendly, electricity- powered apparatus for bench-scale fire testing. The apparatus consists of various elements, of which the most important are ceramic heating pads, used to impose heat fluxes on exposed surfaces of specimens. The test method allows to control the heating pads’ temperature and to adjust the distance between the heating pads and the specimen to obtain well-defined heat fluxes up to 50–60 kW/m2. Higher heat fluxes and temperatures can be obtained by setting the heating pads in full power mode, with or without the use of a thermal shield, which can lead to heat fluxes up to 150 kW/m2. The heating and thermal boundary conditions imposed by the apparatus are characterised and discussed, and the thickness of the convective boundary layer at the heating pads’ surface is estimated significantly lower than in the case of gas- fired radiant panels. The performance of the apparatus is analysed for various conditions: controlling the temperature of the heating pads, in an open environment or with the presence of thermal shields, and in full power mode. A few examples of application of the apparatus to fire test typical construction materials (steel and glass) are also presented. These results emphasise the well-defined heating conditions in temperature-controlled mode. The study finally discusses the advantages and limitations of the apparatus, as well as many possibilities of future applications and improvement for future research studies.
Ključne besede: radiant panels, fire testing, heat transfer, heat flux, electrical heating pads, thermal boundary conditions
Objavljeno v DiRROS: 15.04.2024; Ogledov: 89; Prenosov: 42
Celotno besedilo (3,11 MB)
Gradivo ima več datotek! Več...

Povzetek: We prove a dimension-free $L^p(\Omega)\times L^q(\Omega)\times L^r(\Omega)\rightarrow L^1(\Omega\times (0,\infty))$ embedding for triples of elliptic operators in divergence form with complex coefficients and subject to mixed boundary conditions on $\Omega$, and for triples of exponents $p,q,r \in (1,\infty)$ mutually related by the identity $1/p+1/q+1/r=1$. Here $\Omega$ is allowed to be an arbitrary open subset of $\mathbb{R}^d$. Our assumptions involving the exponents and coefficient matrices are expressed in terms of a condition known as $p$-ellipticity. The proof utilizes the method of Bellman functions and heat flows. As a corollary, we give applications to (i) paraproducts and (ii) square functions associated with the corresponding operator semigroups, moreover, we prove (iii) inequalities of Kato-Ponce type for elliptic operators with complex coefficients. All the above results are the first of their kind for elliptic divergence-form operators with complex coefficients on arbitrary open sets. Furthermore, the approach to (ii),(iii) through trilinear embeddings seems to be new.
Ključne besede: elliptic differential operator, p-ellipticity, operator semigroup, multilinear estimate
Objavljeno v DiRROS: 15.03.2024; Ogledov: 85; Prenosov: 50
Celotno besedilo (1,10 MB)
Gradivo ima več datotek! Več...

Povzetek: Forest biomass is an essential resource in relation to the green transition and its assessment is key for the sustainable management of forest resources. Here, we present a forest biomass dataset for Europe based on the best available inventory and satellite data, with a higher level of harmonisation and spatial resolution than other existing data. This database provides statistics and maps of the forest area, biomass stock and their share available for wood supply in the year 2020, and statistics on gross and net volume increment in 2010–2020, for 38 European countries. The statistics of most countries are available at a sub-national scale and are derived from National Forest Inventory data, harmonised using common reference definitions and estimation methodology, and updated to a common year using a modelling approach. For those counties without harmonised statistics, data were derived from the State of Europe’s Forest 2020 Report at the national scale. The maps are coherent with the statistics and depict the spatial distribution of the forest variables at 100 m resolution.
Ključne besede: harmonised statistics, harmonised maps, forest biomass, gorest increment, Europe
Objavljeno v DiRROS: 11.03.2024; Ogledov: 106; Prenosov: 51
Celotno besedilo (1,81 MB)
Gradivo ima več datotek! Več...